Pinch a branch and live in the soil. You're not afraid of the heat!

Author:JamesZ Date:2022-04-05 15:51

As the weather gets hotter and the temperature gets higher and higher, cutting becomes more and more difficult, especially for woody plants, such as rose and rose, but cutting of herbaceous flowers is not so difficult. Cutting can be done even if the temperature is high. Today's flowers and flowers will introduce to you that living flowers can be cut in hot weather!

1. Million Xiaoling cutting

1 Preparation of soil

The soil should be loose. You can choose general cultivation soil or rotten leaf soil peat soil. If you have carbendazim at home, you can disinfect it with diluted carbendazim to reduce bacterial infection

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

2 cutting cuttings

Cutting millions of Xiaoling, you can use bud cutting to cut the top part of the branch, with a length of about 45 cm

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

3 cutting

Cut millions of Xiaoling into the prepared soil, compact and water through

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

4 moisturizing treatment

In order to improve the survival rate, you can cover the seedling box. If you use flowerpot cutting, you can cover it with a plastic bag and poke a few holes in the plastic bag. After preparation, put the seedling box to the scattered light for culture

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

5 maintenance

After the cuttings grow new buds, they can be placed in a place with sufficient light. After more than a month, they can be put into the pot

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

2. Geranium cutting

1 prepare the flowerpot

Here we teach you a disposable plastic cup for waste utilization and drinking water. Put a few holes in the bottom of the cup and it can be used to make a flower pot, which is economical and convenient

flowers and plants

2 branch selection

Geranium can be cut into about ten centimeters with semi lignified branches, and one or two leaves can be retained on each branch

flowers and plants

3 matrix selection

In order to prevent Geranium cuttings from rotting, river sand can be used. When in use, wash the river sand, put it into a plastic bottle and insert the geranium cuttings

flowers and plants

4 maintenance

After cutting, put the cuttings in the scattered light environment and spray water every day to keep the soil moist

flowers and plants

5 Upper Basin

When you see the roots of white flowers in the plastic bottle, you can put them in the pot. Prepare a new pot for the geranium and let it grow healthily

flowers and plants

3. Sun cutting

1 cutting cuttings

Sunflower is particularly easy to cut. It can live by cutting a few sections at will. The length is optional, as long as it is not too short

flowers and plants

(photo Author: QQQQ source: Yuhua Valley Forum)

2 cutting

Sunflower has no requirements for soil. The garden soil at home can be cut alive. Remember to pour water after cutting

flowers and plants

(photo Author: QQQQ source: Yuhua Valley Forum)

3 maintenance

After cutting, it can be kept in a cool place for a period of time, or directly in the sun. Sunflower grows very fast and can bloom in less than a month

flowers and plants

(photo Author: QQQQ source: Yuhua Valley Forum)

4. Margaret cutting

1 cutting selection

Marguerite can use terminal bud cutting. Usually, she pinches the tip to hit the top, and the cut part can be used for cutting

2 cutting

The matrix for cutting Margaret can be pure vermiculite or rotten leaf soil plus vermiculite. It is loose and breathable. After cutting, it should be watered with water

flowers and plants

(photo Author: unknown source: Yuhua Valley)

3 maintenance

After cutting, put it in a cool and ventilated environment and take root in about 20 days. When you see five or six real leaves growing, you can transplant them

5 transplanting management

The transplanted soil can be mixed with rotten leaf soil, peat soil and perlite, keep the soil moist during growth, pick the heart and top in time, and soon bloom into flower balls

flowers and plants

(photo Author: Mulan linger source: HuaBa)

5. Clematis cutting

1. Cuttings selection

1. For Clematis cutting, semi lignified branches need to be selected. Branches that are too tender or completely lignified are not easy to cut and take root. The length is about 15 cm, ensuring that there are two nodes on each cuttings

2 soaking

In order to improve the rooting rate, the treated cuttings can be soaked in vitamin B solution for two hours, then taken out, dried, and coated with a little rooting powder at the end of the cuttings

3 cutting

Clematis can be cut with perlite. Put perlite in the seedling box and fill it with eight points, and then insert Clematis branches into the matrix

flowers and plants

(author: drunk too much source: stepping on flowers)

4 watering

After all Clematis branches are inserted, pour the seedling box thoroughly and ensure that the branches are closely combined with perlite

5 moisturizing treatment

During the growth of cuttings, it is necessary to ensure that the air has sufficient humidity. When it is hot, the seedling box can be often opened for ventilation

6 maintenance

Before the branches take root, that is, before new leaves grow, don't expose them to the sun. It's better to scatter light. Spray water often to take root soon

flowers and plants

(author: drunk too much source: stepping on flowers)

7 transplanting

Pay attention to the observation. When you see the white root system exposed from the bottom of the seedling box, you can go to the pot for transplanting. Prepare the transplanting pot and choose loose, breathable and nutritious soil. Huahua is recommended to mix perlite, vermiculite and peat in the ratio of 1:1:1

6. Platycodon grandiflorum cutting

1. Cuttings selection

The cuttings of Platycodon grandiflorum should be shorter, leaving one or two nodes. If the branches are too long, the rooting rate will be much worse. Cut obliquely. In order to reduce transpiration, the leaves can be cut off

2 cutting

The soil can be half nutritious soil and half coconut bran. After cutting, compact the soil by hand to closely combine the cuttings with the soil, water it and place it at the scattered light for maintenance

flowers and plants

3 maintenance

Before germination and rooting, it must be ensured that the cuttings have sufficient air humidity. When two or three leaves grow from the branches, they can be placed in a place with sufficient light for normal maintenance

7. Rieger Begonia

1. Cuttings selection

When choosing cuttings, you must choose healthy ones without diseases and pests. If you find diseases and pests on the branches, you must cut them off with scissors

2. Ear cutting treatment

Rieger Begonia has a lot of juice. If it is cut down and cut directly, it is easy to be infected by bacteria in the soil. Therefore, it must be dried in a cool and ventilated place. After the wound no longer flows juice, it can be cut

flowers and plants

3 cutting

Rieger Begonia is a succulent cuttage. The soil must be loose and breathable. It can be cut with perlite vermiculite and other cuttings. After cutting, it is watered with water and placed in a cool and ventilated place to keep the soil moist. It can take root in about a week or two

8. Petunia cutting

1. Cuttings selection

The cuttings of morning glory don't need to be too long. You can choose two nodes at the top of the branch, or you can pinch the top to reduce the branches

2 matrix selection

Petunias like loose and breathable soil. They can choose nutrient soil or peat soil

3 cutting

When cutting, you can make a hole in the matrix with a bamboo stick, and then insert the branches to avoid breaking the branches due to direct insertion

flowers and plants

(photo Author: Weiwei (moshang flower) source: Yuhua Valley)

4 Moisturizing

After cuttings are watered, a layer of fresh-keeping film can be covered on the flowerpot to moisturize and improve the rooting rate. Put the cutted petunia in a warm and bright place to avoid the sun exposure. You can open the plastic wrap at noon every day to breathe for a while

5 cutting

When the petunia grows four or five leaves, it can be transplanted into a new flower pot. At this time, the root system has grown very developed

flowers and plants

(photo Author: Weiwei (moshang flower) source: Yuhua Valley)

6 maintenance

The petunia after being put into the pot is now maintained in a cool and ventilated place for a few days, and then placed in a place with sufficient light. During the growth period, keep the soil moist

9. Blue snowflake cutting

1. Cuttings selection

Cut the strong blue snow branches with a length of about 10 cm. Remove the leaves at the lower part of the branch and keep only the upper leaves

2 cutting

In order to improve the survival rate, you can use vermiculite cutting, as shown in the figure below:

flowers and plants

(photo Author: simple heart)

3 maintenance

After cutting, water it and put it in a cool and ventilated place. New branches and leaves will soon grow

10. Hydrangea cutting

1. Cuttings selection

Hydrangea cuttage can only retain one node, with a length of three to five centimeters. It can be cut 45 degrees obliquely at the bottom and flat at the top. Half of the leaves can be removed to reduce transpiration

2 cutting

The cutting matrix can be vermiculite or peat. If possible, it can be disinfected with potassium permanganate or carbendazim first, and then watered with water to insert Hydrangea cuttings into the matrix and spray water to moisturize

flowers and plants

(photo Author: unknown source: Yuhua Valley)

3 maintenance

When the temperature is between 25 and 30 degrees, rooting is the fastest. Just moisturize it during this time, and it can be put into the pot in about a month

11. Mint cutting

1. Peppermint hydroponic culture

Cut the strong Mint branches and put them into a container full of water. Change the water often, and the roots will grow soon. This method is very simple, especially suitable for novices to breed

flowers and plants

2 mint soil culture

After hydroponics, peppermint can continue hydroponics or be transformed into soil culture. Experienced flower friends can also directly cut Mint branches into the soil. As long as the soil is kept moist, they can take root very quickly

flowers and plants

12. Summer Chrysanthemum cutting

1. Cuttings selection

Cut the twigs of Summer Chrysanthemum, with a length of about 10cm

2. Ear cutting treatment

Remove all the leaves at the lower part of the branch, leaving only the upper leaves

flowers and plants

3 cutting

Vermiculite, perlite or coarse sand can be selected as the matrix for cutting of Summer Chrysanthemum. After cutting, it can be poured with water to keep the matrix moist and take root in about a month

13. Longevity cuttage

1. Cuttings selection

For long-life flower cutting, you can select the branches that have just finished flowering, with a length of about 56 cm, and remove the leaves at the lower part of the cuttings

2 cutting

When cutting, do not bury the leaves of longevity flower, which is easy to cause decay. If the weather is dry, it can be bagged for moisturizing. When the temperature and humidity are around, it can take root in two to three weeks

flowers and plants

14. Crab claw orchid

1. Cuttings selection

Cut the branches of crab claw orchid with a length of about 5cm to ensure health and no diseases and pests

2 cutting

The soil of

cuttage should be loose and breathable. Spray and moisturize every day for about two weeks. p>

flowers and plants

(author: cold winter source: moshang flower)

15. Peony Chlorophytum cutting

1. Cuttings selection

Select the robust peony Chlorophytum, about 10 cm

2 cutting

The peony Chlorophytum is inserted into the loose and breathable soil, watered and placed in the scattered light for maintenance

3 maintenance

During rooting, we should strengthen the air humidity and often spray water, which can take root in about half a month

flowers and plants

Flower friends, have you learned

© Copyright Theflowerwiki.Com. All Rights Reserved. Sitemap DMCA Privacy Policy Novelhall Youbrief
Top

Pinch a branch and live in the soil. You're not afraid of the heat!

JamesZ
2022-04-05 15:51
Description As the weather gets hotter and the temperature gets higher and higher, cutting becomes more and more difficult, especially for woody plants, such as rose and rose, but cutting of herbaceous flowers is not so difficult. Cutting can be done even if the temperature is high. Today's flowers and flowers will introduce to you that living flowers can be cut in hot weather!

1. Million Xiaoling cutting

1 Preparation of soil

The soil should be loose. You can choose general cultivation soil or rotten leaf soil peat soil. If you have carbendazim at home, you can disinfect it with diluted carbendazim to reduce bacterial infection

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

2 cutting cuttings

Cutting millions of Xiaoling, you can use bud cutting to cut the top part of the branch, with a length of about 45 cm

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

3 cutting

Cut millions of Xiaoling into the prepared soil, compact and water through

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

4 moisturizing treatment

In order to improve the survival rate, you can cover the seedling box. If you use flowerpot cutting, you can cover it with a plastic bag and poke a few holes in the plastic bag. After preparation, put the seedling box to the scattered light for culture

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

5 maintenance

After the cuttings grow new buds, they can be placed in a place with sufficient light. After more than a month, they can be put into the pot

flowers and plants

(photo Author: Yan Yan source: Yuhua Valley)

2. Geranium cutting

1 prepare the flowerpot

Here we teach you a disposable plastic cup for waste utilization and drinking water. Put a few holes in the bottom of the cup and it can be used to make a flower pot, which is economical and convenient

flowers and plants

2 branch selection

Geranium can be cut into about ten centimeters with semi lignified branches, and one or two leaves can be retained on each branch

flowers and plants

3 matrix selection

In order to prevent Geranium cuttings from rotting, river sand can be used. When in use, wash the river sand, put it into a plastic bottle and insert the geranium cuttings

flowers and plants

4 maintenance

After cutting, put the cuttings in the scattered light environment and spray water every day to keep the soil moist

flowers and plants

5 Upper Basin

When you see the roots of white flowers in the plastic bottle, you can put them in the pot. Prepare a new pot for the geranium and let it grow healthily

flowers and plants

3. Sun cutting

1 cutting cuttings

Sunflower is particularly easy to cut. It can live by cutting a few sections at will. The length is optional, as long as it is not too short

flowers and plants

(photo Author: QQQQ source: Yuhua Valley Forum)

2 cutting

Sunflower has no requirements for soil. The garden soil at home can be cut alive. Remember to pour water after cutting

flowers and plants

(photo Author: QQQQ source: Yuhua Valley Forum)

3 maintenance

After cutting, it can be kept in a cool place for a period of time, or directly in the sun. Sunflower grows very fast and can bloom in less than a month

flowers and plants

(photo Author: QQQQ source: Yuhua Valley Forum)

4. Margaret cutting

1 cutting selection

Marguerite can use terminal bud cutting. Usually, she pinches the tip to hit the top, and the cut part can be used for cutting

2 cutting

The matrix for cutting Margaret can be pure vermiculite or rotten leaf soil plus vermiculite. It is loose and breathable. After cutting, it should be watered with water

flowers and plants

(photo Author: unknown source: Yuhua Valley)

3 maintenance

After cutting, put it in a cool and ventilated environment and take root in about 20 days. When you see five or six real leaves growing, you can transplant them

5 transplanting management

The transplanted soil can be mixed with rotten leaf soil, peat soil and perlite, keep the soil moist during growth, pick the heart and top in time, and soon bloom into flower balls

flowers and plants

(photo Author: Mulan linger source: HuaBa)

5. Clematis cutting

1. Cuttings selection

1. For Clematis cutting, semi lignified branches need to be selected. Branches that are too tender or completely lignified are not easy to cut and take root. The length is about 15 cm, ensuring that there are two nodes on each cuttings

2 soaking

In order to improve the rooting rate, the treated cuttings can be soaked in vitamin B solution for two hours, then taken out, dried, and coated with a little rooting powder at the end of the cuttings

3 cutting

Clematis can be cut with perlite. Put perlite in the seedling box and fill it with eight points, and then insert Clematis branches into the matrix

flowers and plants

(author: drunk too much source: stepping on flowers)

4 watering

After all Clematis branches are inserted, pour the seedling box thoroughly and ensure that the branches are closely combined with perlite

5 moisturizing treatment

During the growth of cuttings, it is necessary to ensure that the air has sufficient humidity. When it is hot, the seedling box can be often opened for ventilation

6 maintenance

Before the branches take root, that is, before new leaves grow, don't expose them to the sun. It's better to scatter light. Spray water often to take root soon

flowers and plants

(author: drunk too much source: stepping on flowers)

7 transplanting

Pay attention to the observation. When you see the white root system exposed from the bottom of the seedling box, you can go to the pot for transplanting. Prepare the transplanting pot and choose loose, breathable and nutritious soil. Huahua is recommended to mix perlite, vermiculite and peat in the ratio of 1:1:1

6. Platycodon grandiflorum cutting

1. Cuttings selection

The cuttings of Platycodon grandiflorum should be shorter, leaving one or two nodes. If the branches are too long, the rooting rate will be much worse. Cut obliquely. In order to reduce transpiration, the leaves can be cut off

2 cutting

The soil can be half nutritious soil and half coconut bran. After cutting, compact the soil by hand to closely combine the cuttings with the soil, water it and place it at the scattered light for maintenance

flowers and plants

3 maintenance

Before germination and rooting, it must be ensured that the cuttings have sufficient air humidity. When two or three leaves grow from the branches, they can be placed in a place with sufficient light for normal maintenance

7. Rieger Begonia

1. Cuttings selection

When choosing cuttings, you must choose healthy ones without diseases and pests. If you find diseases and pests on the branches, you must cut them off with scissors

2. Ear cutting treatment

Rieger Begonia has a lot of juice. If it is cut down and cut directly, it is easy to be infected by bacteria in the soil. Therefore, it must be dried in a cool and ventilated place. After the wound no longer flows juice, it can be cut

flowers and plants

3 cutting

Rieger Begonia is a succulent cuttage. The soil must be loose and breathable. It can be cut with perlite vermiculite and other cuttings. After cutting, it is watered with water and placed in a cool and ventilated place to keep the soil moist. It can take root in about a week or two

8. Petunia cutting

1. Cuttings selection

The cuttings of morning glory don't need to be too long. You can choose two nodes at the top of the branch, or you can pinch the top to reduce the branches

2 matrix selection

Petunias like loose and breathable soil. They can choose nutrient soil or peat soil

3 cutting

When cutting, you can make a hole in the matrix with a bamboo stick, and then insert the branches to avoid breaking the branches due to direct insertion

flowers and plants

(photo Author: Weiwei (moshang flower) source: Yuhua Valley)

4 Moisturizing

After cuttings are watered, a layer of fresh-keeping film can be covered on the flowerpot to moisturize and improve the rooting rate. Put the cutted petunia in a warm and bright place to avoid the sun exposure. You can open the plastic wrap at noon every day to breathe for a while

5 cutting

When the petunia grows four or five leaves, it can be transplanted into a new flower pot. At this time, the root system has grown very developed

flowers and plants

(photo Author: Weiwei (moshang flower) source: Yuhua Valley)

6 maintenance

The petunia after being put into the pot is now maintained in a cool and ventilated place for a few days, and then placed in a place with sufficient light. During the growth period, keep the soil moist

9. Blue snowflake cutting

1. Cuttings selection

Cut the strong blue snow branches with a length of about 10 cm. Remove the leaves at the lower part of the branch and keep only the upper leaves

2 cutting

In order to improve the survival rate, you can use vermiculite cutting, as shown in the figure below:

flowers and plants

(photo Author: simple heart)

3 maintenance

After cutting, water it and put it in a cool and ventilated place. New branches and leaves will soon grow

10. Hydrangea cutting

1. Cuttings selection

Hydrangea cuttage can only retain one node, with a length of three to five centimeters. It can be cut 45 degrees obliquely at the bottom and flat at the top. Half of the leaves can be removed to reduce transpiration

2 cutting

The cutting matrix can be vermiculite or peat. If possible, it can be disinfected with potassium permanganate or carbendazim first, and then watered with water to insert Hydrangea cuttings into the matrix and spray water to moisturize

flowers and plants

(photo Author: unknown source: Yuhua Valley)

3 maintenance

When the temperature is between 25 and 30 degrees, rooting is the fastest. Just moisturize it during this time, and it can be put into the pot in about a month

11. Mint cutting

1. Peppermint hydroponic culture

Cut the strong Mint branches and put them into a container full of water. Change the water often, and the roots will grow soon. This method is very simple, especially suitable for novices to breed

flowers and plants

2 mint soil culture

After hydroponics, peppermint can continue hydroponics or be transformed into soil culture. Experienced flower friends can also directly cut Mint branches into the soil. As long as the soil is kept moist, they can take root very quickly

flowers and plants

12. Summer Chrysanthemum cutting

1. Cuttings selection

Cut the twigs of Summer Chrysanthemum, with a length of about 10cm

2. Ear cutting treatment

Remove all the leaves at the lower part of the branch, leaving only the upper leaves

flowers and plants

3 cutting

Vermiculite, perlite or coarse sand can be selected as the matrix for cutting of Summer Chrysanthemum. After cutting, it can be poured with water to keep the matrix moist and take root in about a month

13. Longevity cuttage

1. Cuttings selection

For long-life flower cutting, you can select the branches that have just finished flowering, with a length of about 56 cm, and remove the leaves at the lower part of the cuttings

2 cutting

When cutting, do not bury the leaves of longevity flower, which is easy to cause decay. If the weather is dry, it can be bagged for moisturizing. When the temperature and humidity are around, it can take root in two to three weeks

flowers and plants

14. Crab claw orchid

1. Cuttings selection

Cut the branches of crab claw orchid with a length of about 5cm to ensure health and no diseases and pests

2 cutting

The soil of

cuttage should be loose and breathable. Spray and moisturize every day for about two weeks. p>

flowers and plants

(author: cold winter source: moshang flower)

15. Peony Chlorophytum cutting

1. Cuttings selection

Select the robust peony Chlorophytum, about 10 cm

2 cutting

The peony Chlorophytum is inserted into the loose and breathable soil, watered and placed in the scattered light for maintenance

3 maintenance

During rooting, we should strengthen the air humidity and often spray water, which can take root in about half a month

flowers and plants

Flower friends, have you learned

More
Related articles