1、 Method

1. Time: it is generally carried out in early spring. If it is indoors, it is generally from March to April. If it is outdoors, it can be in late April

2. Substrate: it is generally selected with good drainage effect, and the ventilation also needs to be guaranteed. Generally, it is pure sand or vermiculite, which will be relatively clean. It is best to wash it with clean water for several times, and then wash it with boiling water to achieve the purpose of disinfection

3. Cuttings: the survival rate of semi lignification will be higher. Cut it into about 10cm. The incision must be flat and smooth without uneven. Keep the two leaves on the top, and remove the rest to prevent it from rotting

4. Cutting: insert the cuttings, about one-third of the depth, not too deep

5. Later stage: after the completion of post pouring and water penetration, the temperature shall be maintained at about 20 ℃, and it can take root after waiting for 1 month

2、 Can you cut in winter

Generally, it is carried out in spring, and the probability of survival will be higher. It can also be carried out in winter, as long as the temperature is maintained in the greenhouse