How did the green rose grow 99 meters

1、 Add some urea to make the green rose grow 99 meters

1. If you want to make green pineapple grow faster and faster, sufficient nitrogen fertilizer is essential. Huahua suggested adding some agricultural urea. Dilute 3-5 grains of urea into a solution in water to become a urea solution rich in nitrogen

2. Put the urea solution in a watering can and spray it on the leaves of green pineapple. Use it once every 15-20 days. When the leaves of green pineapple absorb the nitrogen fertilizer in urea, they will grow stronger and stronger like eating hormones

2、 Pour some rice washing water to make the leaves of lvluo green

1. To make the leaves of green pineapple green, ordinary fertilization is essential. Huahua thinks it's best to use the rice washing water every family has. Rice washing water contains a lot of broken rice residue and bran, which can supplement nutrients for green pineapple and make its leaves greener

2. Collect the rice washing water, put it in a clean plastic bottle, seal it and ferment it in the sun. It can be fermented successfully in about 1-2 months. If you want to ferment faster, you can also put brown sugar in the bottle

3. After the rice washing water is successfully fermented, dilute it with water in the ratio of 1:10, and then pour it directly with green pineapple. Lvluo absorbs the nutrients in the rice washing water, and the leaves become greener and greener

3、 Wrap a piece of tape or fishing line to let the green rose climb all over the wall

1. If you want lvluo to climb all over the wall, you must give lvluo a support point so that it can climb up along the wall. The simplest way is to find a fishing line or rope, fix it on the wall, and then wrap the branches of green Luo around the fishing line or rope, so that green Luo can climb to the wall along the rope

2. If there are flower friends who don't want to punch holes in the wall, they can also wait until the branches of lvluo grow longer and stick them on the wall with adhesive tape at intervals, so that lvluo can climb the wall

How did asparagus grow 99 meters

1、 Add some slow-release fertilizer to make asparagus grow 99 meters

1. Asparagus doesn't like heavy fertilizer, so you can usually apply slow-release fertilizer to asparagus. Put about 10 slow-release fertilizer particles into water to melt, and then directly irrigate the roots of asparagus. Use it once in about 10 days to make asparagus grow and flourish

2. Asparagus is afraid of cold. If there is no heating and air conditioning at home, asparagus will enter the dormancy period in winter. During winter and winter solstice, water can be poured 1 times for the whole winter. At the same time, some bone powder is placed along the flower pot about 3-5cm, and then spray to the leaves 1 times a day to ensure the humidity. p>

2、 Place it correctly so that asparagus doesn't have yellow leaves

1. Asparagus is very sensitive to smoke and dust. Once you put it in the kitchen or near the kitchen, the oil fume will fall on the leaves of asparagus, which hinders the breathing of asparagus leaves, and the leaves of asparagus will become more and more yellow. Therefore, asparagus must be placed away from smoke and dust

2. When the temperature is low in winter, asparagus is particularly afraid of cold. Especially when the cold wind blows, the leaves of asparagus will turn yellow. Keep the leaves away from the window sill and other places where the wind is strong in winter

3、 After multiple pruning, asparagus can become more and more stylish

1. Asparagus grows fast and must be pruned frequently. In the early growth stage of asparagus, we should pay attention to topping more and control the plant type between 30-35cm. The best ratio of stem to branch and stem is 5:2 or 5:1. If there are too many branches, the stem is too short and not tall enough

Before trimming:

After trimming:

2. In the process of continuous topping of asparagus, all bent rods and over dense branches should be cut off to ensure the density of branches. If the branches are bent, tie them up and make them straight

How did Chlorophytum grow into a waterfall

1、 Pour some fish tank water and the Chlorophytum will quickly become a waterfall

1. If you want the aquarium to grow, you can make it grow. The fish tank water contains a lot of fish excreta and leftover fish food. It is especially rich in nitrogen. It is especially suitable for Chlorophytum

2. Put the replaced fish tank water to dry at room temperature for 1-2 days, and then pour it directly on the Chlorophytum. When Chlorophytum absorbs the nitrogen element in the fish tank water, it can grow and become a waterfall. Isn't that a matter of minutes

2、 Add some egg shells, the Chlorophytum leaves are firm and 2 fingers wide

1. Egg shell can supplement calcium and other trace elements for Chlorophytum, so collect the egg shell at home, smash it, heat it in a pan and fry it, so as to release the calcium in the egg shell

2. When in use, you can dig a few small holes at the edge of the flower pot of Chlorophytum, then bury the egg shell in the flower pot and cover it with soil. Chlorophytum absorbs the calcium in the egg shell, and the leaves will become wider and wider

3、 Turn the flowerpot in time to make the leaves of Chlorophytum more symmetrical

1. Chlorophytum has phototropism. If you want the Chlorophytum waterfall to look good, the whole plant must look uniform. In winter, Chlorophytum can be placed 1m away from nanyangtai to direct the sun

2. At the same time, rotate the flowerpot once a week so that each side of the Chlorophytum can be exposed to the sun. In this way, the leaves of the Chlorophytum can become symmetrical and shaped to ensure the same sagging height

How did you raise the crab claw orchid waterfall

1、 Bury some bean cake fertilizer and crab claw orchid will quickly become a waterfall

1. If you want the crab claw to become a waterfall quickly, you must give it enough nitrogen fertilizer. Find a clean plastic bottle, fill about 1 / 3 of the bean dregs, add 1 / 3 of the water, seal it, ferment in the sun, and open the lid for ventilation in about 3-5 days. If the sun is not very poisonous in winter, it can also be fermented next to the radiator

2. When the water in the bottle turns dark black, the retting is successful. At this time, pour out the clear liquid on the upper layer of the bottle, mix it with clean water in the ratio of 1:10, and directly pour it into the crab claw orchid. The crab claw orchid absorbs the nitrogen element in the bean cake fertilizer, and can grow faster and faster, and finally become a waterfall

2、 Bury pine needles at the bottom of the basin, and the leaves of crab claw orchid look like waxed

1. If you want to make the leaves of crab claw green and bright, you can bury pine needles at the bottom of the basin. Look for those rotten, black or gray pine needles under the pine tree, take them back and dry them in the sun for 2-3 days, then mix them with nutrient soil and place them on the bottom of the crab claw basin

2. Pine needles are placed at the bottom of the flowerpot, which can achieve the purpose of loosening and ventilation. Even if more water is poured, it can leak out from the bottom of the basin to ensure that the crab claw will not rot. When the root system grows vigorously, the leaves naturally become green and bright

3、 Crab claw orchid is blooming more and more

1. Crab claw orchid belongs to short sunshine flowers. If it blooms, it is basically because the light time is too long. Now let the crab claw orchid irradiate for 8 hours every day, and then shut it in a completely dark room, or put a few black plastic bags, or cover the whole crab claw orchid with cartons

2. In this way, after a cycle of about one month, you can see the flower buds of crab claw orchid. At this time, don't move the crab claw orchid at will. Spray some potassium dihydrogen phosphate, which can make the flower buds of the crab claw orchid differentiate more and bloom more and more

How does the leaf of Clivia grow

1、 Bury some peanuts and melon seeds at the bottom of the basin. The longer the Clivia, the more prosperous it will be

1. Clivia likes oil crops. If you want Clivia to grow more and more prosperous, add some peanuts and melon seeds to it at the bottom of the basin! First lay a layer of nutrient soil about 3cm thick on the bottom of the basin, then grab a handful of fried peanuts or melon seeds and sprinkle them evenly on the basin surface. Remember that peanuts and melon seeds must be made of original Austria

2. Sprinkle a handful of melon seeds and peanuts, and then cover them with nutrient soil. Remember that the root system of Clivia can not directly contact the peanut seeds, otherwise it is easy to burn the roots. The root system of Clivia absorbs the nutrients from peanuts and melon seeds. It seems to grow like a demon

2、 Rub some beer on the leaves, and the leaves of Clivia are oily

1. If you want to make the leaves of Clivia shiny, you have to add some fertilizer. The most commonly used flower is beer! Mix the remaining beer and water into beer solution in the ratio of 1:20

2. Find a sponge or soft cloth, dip it in beer solution and gently wipe the leaves of Clivia. The leaves of Clivia have many pores, which can absorb the nutrients in the beer solution, and the leaves will become oily

3、 With large temperature difference and more fertilization, Clivia can blossom 100

1. If you want to make Clivia blossom more, you must apply more phosphorus and potassium fertilizer. You can go to the vegetable market to get some fish intestines, put them in plastic bottles, add water, seal and ferment, and open the lid for ventilation in about 3-5 days. After ripening, water Clivia with water in the ratio of 1:50 to promote more differentiation and germination of Clivia, so as to bloom more

2. Only when the temperature difference is large enough can the Clivia blossom more. Now it has just entered winter, and the temperature is still very cold. Ensuring that the temperature difference between morning and evening is about 15 ℃, it can promote the Clivia to differentiate more flower buds and bloom more. Generally, there is little temperature difference in Guangdong, and it is normal for Clivia not to bloom

How do you raise meatballs

1、 Less water, more fertilizer, more meatballs, more and more fat

1. If you want more meat to become fatter, you must carry out water control treatment to make more meat have the perception of water shortage. Over time, more meat will use its own leaves to store water, and the leaves will become more and more plump

2. When changing the pot for meat, remember to mix 3-5 slow-release fertilizer particles into the pot soil to slowly release the fertilizer effect in the soil, and then let the meat roots absorb it. More meat absorbs nutrients and can grow fatter and fatter

2、 Spray this water, it's fleshy and crystal clear, like jelly

1. Autumn and winter are full of light and large temperature difference, which is a good time to color meat. If you think the temperature difference at home is not big enough, spray some ice water on the meat to increase the temperature difference, reduce the chlorophyll in the meat leaves and increase more anthocyanins

2. About every evening, spray it on the meat once. Put the ice water in the watering can and spray it directly towards the leaves. 3-5 times at a time is enough

3、 In this way, many heads grow in clusters and become old piles

1. When it is found that the meat in the home grows in vain, the sterilized knife can be used to behead the meat, cut off the part at the top of the stem and remove the top advantage, so as to promote the growth of lateral buds and grow more heads. Over time, the phenomenon of multi head cluster is formed

2. After many heads grow in vain, you can also keep the fleshy stem growing without beheading. When the stem grows to a certain length, remove all the leaves at the lower end, leaving only the leaves at the top, and then give sufficient light. It only takes about one year, and the stem can be lignified and become an old pile