1、 Material preparation

A knife, a pair of scissors, a mineral water bottle with a volume of about 600ml and a bottle of disinfectant

Mineral water bottles can be relatively short, with a large bottom area and relatively hard. Do not choose those with thin thickness and easy deformation

2、 Practice

1. First, cut a hole in the bottle 10 cm from the bottom with a knife, and then cut it horizontally with scissors

2. Handle the bottle mouth. If the bottle mouth is relatively large, you can throw away the bottle cap. If the bottle mouth is too small to let all the roots pass through, you need to cut it from it so that the roots can pass through the middle hole, and then throw away the side with flat cap

3. Mix the disinfectant according to the instructions, and put the two parts of mineral water bottles into it for disinfection

4. Take out the bottle and dry it in a ventilated place

5. Turn the top half of the bottle upside down and put it in the bottom half to make sure it doesn't fall off the bottom of the bottle. Such a simple planting bottle is ready

3、 Usage

1. Before planting, you need to put the seed ball of the letter upside down into the bottle in the upper half, and then put the bottle in the upper half into the bottle in the lower half. Put it on the table to see if the bottle can support it

2. If there is no problem, we need to add water to the lower half of the bottle, about the height of the upper half of the bottle mouth in the lower half of the bottle

3. Put the upper half of the bottle into the lower half of the bottle and put the seed bulb down into the bottle