Waste
There are often some idle small objects at home. It's a pity to throw them away. If you don't throw them away, they will occupy space at home. Why don't you just make a flowerpot~
Milk powder barrel
production method:
1. Prepare a milk powder bucket, rope (hemp rope can be used instead), double-sided adhesive, scissors, lighter, hot melt adhesive and cloth strip
2. Cover the tank with double-sided adhesive tape in turn
3. Wrap the scattered rope or hemp rope around the top and bottom of the bottle respectively. The width of winding can be determined according to your preference. The middle part is not wrapped and left blank
4. Stick the prepared cloth strip on the blank with double-sided adhesive, and stick your favorite trinkets on the cloth strip with hot-melt adhesive
5. Use scissors to poke several holes in the bottom of the bottle (electric drill can be used if possible)
No holes can be used for flower arrangement
Wood clip
production method:
1. Prepare about ten wooden clips, one mineral water bottle, trinkets and glue
2. Cut off the bottom of the mineral water bottle and make it shorter than the wooden clip
3. Clamp the wooden clip on the bottom of the cut mineral water bottle in turn
4. Glue your favorite trinkets to the wood clip
Your meat has a new home~
Waste cloth
production method:
1. Prepare a beverage bottle or waste barreled goods, a piece of waste cloth, needle and thread, scissors
2. Cut the bottle from the middle to the bottom, leaving the bottom. Use scissors to make several holes in the bottom
3. Wrap the cloth around the bottle body, cut it into appropriate size, sew the joint and put it on the bottle
Flowerpots are more lovely than flowers~
Wood and bamboo
Some friends who burn firewood at home often encounter wood with better material and shape. Don't burn such wood. It won't be wasted when it is used as a flowerpot p>
Waste wood section
production method:
1. Prepare a piece of waste wood, drill and paint
2. Place the wood section horizontally on the table and process the upward side
3. Use a drill to drill a space on the wood section where flowers and plants can be placed. The shape can be selected according to your preference. Pay attention to drilling several holes through the wood section
4. Paint the wood section with the color you like
Placed on the desk, pleasing to the eye~
Waste wood or bamboo
production method:
1. Prepare a number of waste boards, hammers and nails; If bamboo is used, just prepare iron wire
2. Erect the wood board into a circle or square, and nail up the two adjacent wood boards with nails; If it is bamboo, use iron wire to connect the bamboo in two and form a circle
Super flowerpot for garden plants
Interesting creative class
Children often lose interest in toy cars after playing for a while, which is really a waste. However, have you ever thought that toy cars can be transformed into small flower pots? There are many such objects. As long as you change your mind, you can harvest a creative flower pot~
Toy car
production method:
1. Prepare toy car (there must be space to place flowers and plants, which is not suitable for fully enclosed type), electric drill
2. Drill several holes in the bottom of the toy car with an electric drill
Coconut
production method:
1. Prepare a coconut, a saw and chopsticks
2. Draw a line at the third part of the coconut and cut it along the line with a saw to clean the pulp
3. Cut a hole in the bottom of the coconut and poke it open with chopsticks
4. Draw your favorite patterns on the surface of coconut
Tile
production method:
1. Prepare several tiles (this method is applicable to friends who have free land at home)
2. Insert the tiles into the soil for fixation and form a semicircle with the wall
That's all for Huahua's sharing today
Do you have a homemade flowerpot you like
If you have more creative ideas, you can leave a message below~