The branches of green pineapple are cut into 8 sections, and a big basin comes out

Lvluo is a flower that every family will raise, not to mention the high temperature in summer. It is just the time when lvluo jumps up. At this time, cut a branch and cut it to survive immediately

Operation steps:

1. From the mother plant of green pineapple, cut off a section of vigorous branches with a sterilized knife, and then cut the branches into small sections with a knife. Note that there is a root on each small section

2. Prepare perlite, coconut bran, or loose and breathable soil as nutrient soil for cutting. At the same time, put the cuttings of green pineapple in a well ventilated place to dry the wound

3. If you want the cuttings to burst the pot as soon as possible, put the branches of the green pineapple on the soil in parallel, pour water once, put them in a ventilated place with good light scattering, and spray water on the surface of the flowerpot with a watering can to ensure sufficient humidity

4. If you want to climb the vine and turn it into a curtain as soon as possible, insert the green rose vertically into the basin soil, bury the air root in the soil, and then pour it once to pervade the water, and put it in a cool and ventilated place

5. It only takes about 10 days for the cuttings of green pineapple to take root! Small green leaves will emerge after rooting

6. It's hot in summer. You can spray water on the leaf surface and around the flower pot. You can also mix some compound fertilizer or leaf fertilizer in the water to make the green rose leaves grow brighter

Cut 8 segments of jasmine branches, and big white roots will appear in 10 days

Now it is the time when Jasmine blooms most vigorously, and some flower friends have finished their Jasmine blooms. For those branches that have finished flowering, we can cut off cuttings and harvest more pots of jasmine

How to operate

1. For cutting branches, it is best to choose those semi lignified branches, because semi lignified Jasmine branches contain more nutrients and have higher rooting survival rate. Use the sterilized knife to cut the jasmine branches into small segments to ensure that 1-2 leaves remain on each segment

2. Prepare the soil needed for cutting, generally loose and breathable nutrient soil. Huahua chose perlite today and poked several small holes in the perlite in the flower pot with chopsticks to ensure that the jasmine branches can be put in

3. Insert the pruned Jasmine branches into perlite, compact them a little, then pour water once, and place them in a place with sufficient scattered light and good ventilation conditions for maintenance

4. The temperature is high in summer. It only takes about 2 weeks to take root

5. After rooting, jasmine branches can be directly transplanted into flower pots for further maintenance. First put it in a ventilated place for 1-2 weeks, and then move it outdoors or nanyangtai to direct the sun. Water it 1-2 times a day, which can make the jasmine grow and flourish

Cut 8 long-lived branches into 10 pots immediately

Longevity always appears black rot in summer. If you don't pay attention, you may die. In order to avoid the death of longevity at home, we can use pruning strips to cut seedlings just in case

How to operate

1. The pruned branches of Changshou flower are trimmed several times with sterilized scissors. At least 2 pairs of leaves are retained on each branch, and then the wound is dried in a well ventilated place. It can also be soaked in carbendazim solution for 2 hours for disinfection

2. Prepare loose and breathable nutrient soil, or use pure sand for cutting, which can also take root quickly. Make a hole in the sand with a wooden stick, and then insert the long-lived flower branches dried in the wound

3. Insert all the branches of Changshou flower into the flowerpot, pour water once, put them in a place with good light scattering indoors, and pay attention to frequent ventilation. Usually remember to spray water on the blade and basin surface to ensure moisture

4. It only takes about a week for the long-lived flower of cutting to sprout its roots! After that, transplant the longevity flower into the flowerpot. Pay attention to receiving 4 hours of direct light every day, and soon a big green pot will grow

Hydrangea branches are cut into 8 sections and bloom into a ball in the coming year

The Hydrangea in many flower friends' homes has failed now. If you don't trim it now, it's estimated that it won't bloom next year! For those pruned branches, we can cut them directly

How to operate

1. The cut Hydrangea branches need to be trimmed slightly, and at least 1-2 leaves should be reserved on each branch. In order to reduce unnecessary nutrient consumption, the leaves can be cut in half with scissors

2. Prepare the soil for cutting. When the temperature is high in summer, vermiculite or red jade soil can be used for cutting. Insert 3-5 vermiculite sticks into the bottom of the cup at one time, and then insert the vermiculite sticks into the small holes of the cup at one time

3. In order to ensure the water needed for cutting, put a tray under the disposable paper cup, add water in the tray, squat the disposable paper cup in the tray, and finally put it in a cool and ventilated place. Never direct the sun

4. It only takes about 20 days to see that the cuttings of Hydrangea produce dense roots

5. After rooting, the hydrangea is transferred to the flower pot, and then placed in a cool and ventilated place, which can be maintained under the shade of outdoor trees. The weather is hot in summer. Water can be poured in the morning and evening to ensure sufficient air humidity

Blue snow branches are cut into 8 sections to keep you cool all summer

It's so hot in summer, you should raise a basin of cool flowers, that's blue snowflakes! Although the blue snowflake grows vigorously, it sometimes becomes toothy and clawy. If you don't trim it at this time, when do you want to wait

How to operate

1. Cut off the blue snowflake branches, and then trim them slightly. The length of each branch is about 5-7cm

2. Prepare loose and breathable nutrient soil and put it in the seedling box. After watering once, insert the branches of blue snowflakes directly and place them in a place with bright scattered light and good ventilation conditions

3. It's hot in summer. It only takes about half a month. The cutting blue snowflakes can basically take root

4. After rooting, transplant the blue snowflake into the flower pot. First, slow down for 1-2 weeks in a place without direct sunlight and good ventilation, and then put it in the sun. Water it 1-2 times a day according to the weather, and soon the blue snowflakes will grow and flourish

Cut 8 sections of Osmanthus branches to keep you cool all summer

High humidity in summer is a good time for cutting Osmanthus fragrans. When pruning Osmanthus fragrans, the cut branches can be directly used for cutting. Don't miss it

How to operate

1. Cut the pruned osmanthus branches slightly with scissors to ensure that 2-3 pairs of leaves remain on each branch, and then put them in a well ventilated place indoors to dry the wound

2. If you want to have a high survival rate of Osmanthus cutting, you can choose pure perlite cutting. Insert the pruned branches into the prepared perlite. To ensure humidity, you can put the flowerpot in a larger flowerpot and cover it with a film

3. Spray water on Osmanthus fragrans leaves regularly to ensure sufficient air humidity. It only takes about 20-30 days to see that the cuttings of Osmanthus fragrans take root

4. After taking root, put the osmanthus in the basin. First slow the basin in the shade for about a week, and then let it bask in the sun. When autumn comes, you can get a basin of blooming osmanthus

The Rhododendron branches are cut into 8 sections to keep you cool all summer

Recently, many flower friends have been giving feedback to Huahua that the cuckoo in my house is falling leaves for no reason and is dying! Before the cuckoo dies, we might as well cut a few pots and leave a few pots of seedlings for standby

How to operate

1. Cut the lower end of the Rhododendron branch at an angle of 45 degrees, keep 6 leaves, then soak in rooting water for 24 hours, take it out and dry the wound in a cool and ventilated place

2. Prepare loose and breathable soil, insert Rhododendron branches into the soil, and water it once. In order to ensure the humidity of Rhododendron, the seal can be covered with fresh-keeping film, tied with 3-5 small holes and placed in a cool and ventilated place

3. It only takes about 20 days for the cuttings of Rhododendron to take root

4. After rooting, transplant the branches into the flowerpot for further maintenance. Pay attention to the humidity and spray water around the leaves and flowerpots sooner or later, so that the Rhododendron can grow more and more prosperous

That's all for Huahua today

For summer cutting, you must remember

Be sure to ventilate