Plastic bottle vegetable growing method 1

Operation steps

1. Prepare the plastic tube 2. Screw off the cap and open a hole at the bottom of the plastic bottle. The size of the hole should be just the extent of clamping the mouth of the plastic bottle, which can be compared with the mouth of another plastic bottle 3. Cut a hole on both sides of the plastic bottle 4. Open a hole the same size as a thin tube on the bottle cap 5. Align the mouth of the plastic bottle with the hole at the bottom, poke it in, and then screw on the cover 5. Poke a small hole in the butt of the top plastic bottle, which is about the diameter of the straw. You can just plug the tube in 6. Insert the thin pipe according to the small hole until several small holes are tied at the bottom near the soil. After watering, you can pour water directly into the thin pipe ~

Plastic bottle vegetable growing method 2

Operation steps

1. Prepare plastic bottles, ropes, strong iron wires or iron bars 2. Punch holes in the middle part of the cap and bottom of the plastic bottle according to the diameter of the iron wire 3. Cut a rectangular opening on one side of the plastic bottle, which is the part marked by the red line 4. Insert the iron wire through the small hole and fix both sides with ropes. Hang it up 5. Fill the plastic bottle with soil and then plant vegetables ~ 7. Other plastic bottles can also be lifted after they are finished ~

Plastic bottle vegetable growing method 3

Operation steps

1. Prepare several plastic bottles, ropes and scissors 2. Open holes on one or both sides of the plastic bottle. There are two holes at the top and one hole at the bottom, such as 1 and 2 in the figure below 3. Use a rope to pass through the two holes above and hang it up ~ for example, 3 in the above figure ~ do you still have this kind of waste plastic bottle in your home then try it quickly