Potted rubber tree maintenance in winter

Author:Jiang Hao Date:2022-04-01 02:55

Temperature: during the winter, the temperature should be controlled at 10 ℃, and plastic bags should be used for insulation when the temperature cannot be reached. Light: try to receive as much light as possible and get in the sun. See the sun for at least 4-5 hours every day. Ventilation: when breeding indoors, open more windows and pay attention to ventilation, but avoid being blown by cold wind. Moisture: the amount of watering should be well controlled. Each watering should be carried out after the soil becomes dry.

1、 Temperature

When raising rubber trees in winter, they should be kept indoors, and the indoor temperature should be adjusted to about 10 ℃, which is conducive to their winter. If the temperature cannot reach the safe winter range, you should pay attention to keeping warm. You can put a plastic bag on it to keep out the cold, and the minimum temperature should not be lower than 5 ℃

2、 Illumination

It likes the sun, especially when the temperature is low and the light is soft in winter, it should bask in the sun as much as possible. See the sun for at least 4-5 hours every day. If you don't receive enough light every day, you should then supplement the light with a supplementary light

 Rubber tree

3、 Ventilation

Although the temperature in winter is relatively low, don't forget the ventilation. Generally, the ventilation is very poor during indoor maintenance, so you should often open windows. But it can't be blown by the cold wind, otherwise it will be bad for the plant to spend the winter

Rubber tree

4、 Moisture

At this time, the water evaporates very slowly, so the amount of water should be controlled when watering. Too much water will not only affect the winter, but also rot the roots. Watering can only be carried out after the soil becomes dry. The water temperature should not be too low. It is best to place it for a period of time and wait until the water temperature is about the same as the room temperature

Rubber tree

© Copyright Theflowerwiki.Com. All Rights Reserved. Sitemap DMCA Privacy Policy Novelhall Youbrief
Top

Potted rubber tree maintenance in winter

Jiang Hao
2022-04-01 02:55
Description Temperature: during the winter, the temperature should be controlled at 10 ℃, and plastic bags should be used for insulation when the temperature cannot be reached. Light: try to receive as much light as possible and get in the sun. See the sun for at least 4-5 hours every day. Ventilation: when breeding indoors, open more windows and pay attention to ventilation, but avoid being blown by cold wind. Moisture: the amount of watering should be well controlled. Each watering should be carried out after the soil becomes dry.

1、 Temperature

When raising rubber trees in winter, they should be kept indoors, and the indoor temperature should be adjusted to about 10 ℃, which is conducive to their winter. If the temperature cannot reach the safe winter range, you should pay attention to keeping warm. You can put a plastic bag on it to keep out the cold, and the minimum temperature should not be lower than 5 ℃

2、 Illumination

It likes the sun, especially when the temperature is low and the light is soft in winter, it should bask in the sun as much as possible. See the sun for at least 4-5 hours every day. If you don't receive enough light every day, you should then supplement the light with a supplementary light

 Rubber tree

3、 Ventilation

Although the temperature in winter is relatively low, don't forget the ventilation. Generally, the ventilation is very poor during indoor maintenance, so you should often open windows. But it can't be blown by the cold wind, otherwise it will be bad for the plant to spend the winter

Rubber tree

4、 Moisture

At this time, the water evaporates very slowly, so the amount of water should be controlled when watering. Too much water will not only affect the winter, but also rot the roots. Watering can only be carried out after the soil becomes dry. The water temperature should not be too low. It is best to place it for a period of time and wait until the water temperature is about the same as the room temperature

Rubber tree

More
Related articles