How to Make a Self-Watering Pot for Plants DIY

If you're a plant lover who forgets to water your greens from time to time, a self-watering pot can be the solution to your problem. Follow these simple steps to make your own self-watering pot for plants.

Materials Needed:

A plastic pot with a drainage hole

A smaller plastic pot without a drainage hole

A wick (such as cotton string or shoelace)

Potting soil

Water

Step 1: Prepare the pots

Start by choosing two plastic pots that fit together. The larger pot should have a drainage hole, and the smaller pot should fit inside it without touching the bottom. Cut a piece of wick that will stretch from the bottom of the larger pot to the top of the smaller pot.

Step 2: Tie the wick

Thread the wick through the drainage hole of the larger pot and up through the center of the smaller pot. Tie the end of the wick to the top of the smaller pot, making sure it is secure and won't slip out.

Step 3: Add soil and water

Fill the larger pot with potting soil, leaving enough space so that the smaller pot can fit inside without touching the soil. Place the smaller pot inside the larger pot and fill it with potting soil as well. Water the soil until it is moist, allowing it to settle into place.

Step 4: Set up the self-watering system

Pour water into the bottom of the larger pot, making sure it doesn't overflow. As the soil dries out, it will draw water up through the wick into the smaller pot, keeping the soil consistently moist. Refill the water in the bottom of the larger pot as needed, and enjoy your low-maintenance self-watering plant!

Conclusion

A self-watering pot for plants DIY is an easy project that can make caring for your garden much easier. By following these simple steps and setting up a self-watering system, you can ensure your plants receive the hydration they need without the constant attention they may require otherwise.