How to Make a Long Plant Pot

Long plant pots are a great way to showcase large plants or multiple smaller plants in a single container. While these pots can be purchased at a gardening store, making your own can be a rewarding and cost-effective project. Here’s how to make a long plant pot:

Materials

Before you get started, you’ll need to gather the necessary materials. Here’s what you’ll need:

Concrete mix

Water

A large bucket or container for mixing the concrete

A long, narrow container to use as a mold

Oil or cooking spray to coat the mold

A drill or hammer and chisel (optional)

Instructions

Once you’ve gathered all of your materials, it’s time to start building your long plant pot:

Coat your mold with oil or cooking spray to prevent the concrete from sticking.

Mix your concrete according to the directions on the package. You will want to mix it to a consistency that is thick but pourable.

Pour a small amount of concrete into the bottom of your mold to create a base layer.

If you want to create drainage holes in your pot, use a drill or the hammer and chisel to create holes in the bottom of the mold.

Continue pouring the concrete into the mold, layer by layer. Be sure to tamp down each layer with a trowel or other flat object to remove any air bubbles.

Once you’ve filled the mold with concrete, use a trowel or putty knife to smooth the top surface of the concrete.

Allow the concrete to cure for at least a day before attempting to remove it from the mold. It’s best to let it cure for several days to ensure that it’s fully hardened.

Carefully remove the concrete from the mold. If it’s difficult to remove, try tapping the sides of the mold with a hammer to loosen it.

If desired, you can paint or stain the concrete to match your décor.

Tips for Success

If you want to ensure that your long plant pot turns out perfectly, here are a few tips to keep in mind:

Choose a mold that is the correct size and shape for your desired pot. Keep in mind that the final pot will be slightly smaller than the mold size due to the thickness of the concrete.

Be sure to coat your mold with oil or cooking spray to prevent the concrete from sticking. Otherwise, you may have trouble removing it from the mold.

If your mold doesn’t have drainage holes, use a drill or hammer and chisel to create them. This will ensure that excess water can drain from the pot.

Take care when removing the concrete from the mold. If you’re having trouble getting it out, try tapping the sides of the mold with a hammer or gently wiggling it back and forth.

Allow the concrete to fully cure before using the pot. This may take several days depending on the type of concrete mix you used.

With a little bit of time and effort, you can create a beautiful long plant pot that will showcase your favorite plants and add a touch of style to your home or garden. Happy crafting!