Introduction

Large pots for plants not only add a decorative touch to outdoor spaces but also provide ample space for plants to grow bigger and stronger. Buying these pots can be expensive, but making them is an easy and cost-effective DIY project. In this article, we will guide you on how to make large pots for plants that are unique, durable, and suitable for different plant types.

Materials Needed

To make large pots for plants, you will need the following materials:

Construction adhesive

Large plastic trash cans (preferably with a lid)

Concrete mix

Wire mesh

Waterproof sealer

Utility knife

Sandpaper

Paint (optional)

Instructions

1. Prepare the plastic trash cans

Cut off the bottom of the trash can using a utility knife to create the base of the pot. Then, using the utility knife, cut out a large circular or oval shape from the lid. This will serve as the opening for the plant to grow.

2. Add the wire mesh

Line the inside of the trash can with wire mesh, ensuring that you leave enough slack to mold the mesh to the desired shape of the pot. This will help the pot retain its shape and prevent it from cracking during the drying process.

3. Mix the concrete and fill the pot

Mix the concrete according to the manufacturer’s instructions, and fill the pot to the desired height. Use a trowel to smooth out the concrete and create a level surface. Allow the concrete to dry for at least 24-48 hours, depending on the type of concrete used.

4. Remove the pot from the mold

To remove the pot from the mold, gently wiggle the trash can until the concrete slides out. You might have to use a utility knife to loosen parts of the mold that are still stuck to the concrete. Be careful not to crack or damage the pot during this process.

5. Sand and seal the pot

Use sandpaper to smooth out any rough edges or imperfections on the pot. Once you've done that, apply a waterproof sealer to the pot's interior and exterior to protect it from moisture and extend its lifespan. You can also paint the pot to match your outdoor décor.

Conclusion

Making large pots for plants is a simple and cost-effective way to enhance your outdoor spaces. With the right tools and materials, you can create pots that are functional, durable, and can accommodate different types of plants. Remember to take care when removing the pot from the mold and always sand and seal it to protect it from moisture. Happy planting!