How to Make Holes with Box Cutter in Planter Pots

Planter pots are a beautiful addition to your garden, but often lack sufficient drainage holes, which can lead to waterlogged plants and root rot. In this guide, we will show you how to make holes with a box cutter in planter pots to ensure proper drainage and healthy plants.

What You Will Need

To get started, you will need the following materials:

Planter pot

Box cutter

Tape measure or ruler

Sharpie or marker

Safety glasses or goggles

Step-by-Step Guide

Step 1: Preparation

Before you start cutting holes in your planter pot, it is essential to make sure you have a clean and safe workspace. Place the planter pot on a flat surface and secure it with tape or clamps. Put on your safety glasses or goggles to protect your eyes from any flying debris.

Step 2: Measuring and Marking

Using a tape measure or ruler, measure the diameter of the pot's bottom. This measurement will determine how many holes you need and their size. Divide the diameter by three to determine the distance between each hole. Mark the spots where you will cut the holes on the bottom of the pot with a Sharpie or marker.

Step 3: Cutting the Holes

With the pot secured and marked, take your box cutter and start cutting through the bottom of the pot along the marked spots. Make sure to apply even and firm pressure, moving the blade in a circular motion to cut through the plastic. Take your time to ensure that the holes are the correct size and evenly spaced.

Step 4: Finishing Up

After you have cut all the required holes, turn the planter pot over and check for any rough edges or plastic shards. Use sandpaper, a file, or a knife to smooth out any jagged edges until the holes are clean and smooth.

Conclusion

Making holes with a box cutter in planter pots doesn't have to be a daunting task. With the right tools and a steady hand, you can quickly and simply ensure proper drainage and healthy plants. Remember to take safety precautions and follow the step-by-step guide carefully. Happy planting!