How to Make Exposed Aggregate Planter Pots

If you're looking for a unique and stylish way to display your plants, exposed aggregate planter pots may be just the thing for you. These pots are made from a mixture of cement and decorative stones, providing a sturdy and visually appealing design that is perfect for both indoor and outdoor use. Here's how you can make your own exposed aggregate planter pots.

Materials

To make exposed aggregate planter pots, you'll need:

Cement

Decorative stones

Mold or container for shaping the pot

Bucket or container for mixing the cement

Water

Trowel or spatula

Sandpaper or wire brush

Steps

Clean your mold or container thoroughly and choose the size and shape of your pot. You can use an existing container or make your own using plastic or cardboard as a mold.

Mix the cement and water in a bucket or container according to the instructions on the cement packaging. The consistency of the mixture should be thick and smooth, without any lumps or dry spots.

Add the decorative stones to the mixture and stir gently. The stones should be evenly distributed throughout the mixture, but avoid over-mixing as this can cause the stones to break or lose their decorative effect.

Pour the mixture into your mold or container, making sure to smooth out any lumps or bumps and fill in any gaps or air pockets. Use the trowel or spatula to shape the pot and create a flat and level base.

Allow the pot to dry and set for at least 24-48 hours, or until the mixture is completely firm and hardened.

Remove the pot from the mold or container carefully, using a sharp knife or scissors to cut away any excess mold material or plastic. If you used cardboard, you can simply tear it away from the pot.

Use sandpaper or a wire brush to rub away any rough or sharp edges and smooth out the surface of the pot. You can also use a sealant or wax to protect the pot from weathering and give it a glossy finish.

Add soil and your favorite plants to the pot and display it in your home or garden with pride!

Tips and Tricks

Experiment with different sizes and shapes of molds to create a range of pot styles.

Choose decorative stones that complement your home or garden decor, such as smooth pebbles, colored glass chunks, or polished granite.

Use a rubber mallet or hammer to gently tap the sides of the mold or container as you pour in the mixture, to remove any air pockets and ensure that the mixture settles evenly.

Be sure to protect your skin and eyes while mixing and pouring the cement, using gloves, goggles, and a face mask if necessary.

With these simple steps and tips, you can make your own unique and beautiful exposed aggregate planter pots that are perfect for showcasing your favorite plants and adding a touch of style to any space.