How to Make a Self Watering Plant Pot
If you have a busy schedule or tend to forget to water your plants, a self watering plant pot is a solution that you may want to try. These pots can help ensure that your plants get the water they need without requiring constant attention from you. Here is a guide on how to make your own self watering plant pot:
Materials Needed
To make a self watering plant pot, gather the following materials:
Large plastic container with a lid
Two smaller plastic containers
Cotton or nylon rope
Potting soil
Plant
Instructions
Follow these instructions to make your own self watering plant pot:
Drill a small hole on the side of the plastic container near the bottom. This hole is where the rope will go through to deliver water to the plant.
Place one of the smaller plastic containers inside the larger container, making sure that it is centered and not touching the sides of the larger container.
Cut a piece of rope that is long enough to reach from the bottom of the small container to the top of the larger container. Thread the rope through the hole and tie a knot on the inside of the container.
Fill the larger container with potting soil, leaving room for the smaller container to fit inside. The soil should be level with the rim of the smaller container.
Place the plant in the smaller container and fill it with potting soil, leaving a little space at the top.
Insert the smaller container into the larger container on top of the soil. The rope should be hanging down into the small container.
Fill the smaller container with water so that the water level touches the cotton or nylon rope. The rope will act as a wick to draw the water up to the plant when needed.
Put the lid on top of the larger container to help trap moisture in.
Conclusion
A self watering plant pot can take some of the hassle out of caring for your plants. With a few simple materials and some basic instructions, you can make your own self watering plant pot and ensure that your plants get the water they need to grow and thrive.