How to Make a DIY Water Globe for Plants

A water globe is a handy tool for keeping your plants hydrated even when you're not around. It's great if you're busy or if you go on vacation but still want to keep your plants healthy. Water globes are also an excellent decorative accessory for your home or office. In this article, we'll show you how to make a DIY water globe for plants in just a few simple steps.

What You'll Need:

A glass jar with a lid

An absorbent material, such as cotton or a sponge

A plastic straw or a wooden skewer

A drill or a hammer and a nail

A plant or plants

Water

Instructions:

Step 1: Prepare the Glass Jar

Using a drill or a hammer and a nail, create a small hole in the center of the jar lid. The hole should be small enough to fit the plastic straw or wooden skewer snugly. Make sure the edges of the hole are smooth to avoid injuring your plants.

Step 2: Prepare the Absorbent Material

Cut a piece of absorbent material into a small ball that will fit through the hole in the lid easily. Cotton balls or sponge work best, but any absorbent material will do. The ball should be big enough to fill the lid's hole, but not so large that it touches the sides of the jar.

Step 3: Insert the Straw or Skewer

Next, insert the plastic straw or wooden skewer through the hole and into the center of the absorbent material. The end of the straw or skewer should be at the bottom of the jar, with the absorbent material resting on the inside of the lid.

Step 4: Add Water

Add water to the jar, filling it about two-thirds of the way up. Don't fill it to the top, as you'll need room for the plants and the air. Avoid overfilling the jar, as it may cause water to escape from the hole when you insert the lid.

Step 5: Plant Your Plant

Now it's time to plant your plant. Choose a small plant or cutting that will fit comfortably inside the jar. Gently push the plant's roots down the straw or skewer and into the absorbent material. The plant should be sitting comfortably in the center of the jar and its roots should be touching the absorbent material.

Step 6: Close the Lid

Finally, close the lid, making sure that the straw or skewer is centered and the absorbent material is snug. If the material shifts, your plant may not get the water it needs. Check that the lid is securely fastened and that the plant has room to breathe.

Maintenance:

Monitor the water level in the jar and refill it when necessary. The absorbent material should always be damp, but not soaking wet or bone dry. Try to avoid exposing the jar to direct sunlight as it may cause the water to evaporate quickly. If you notice that the plant is not getting enough water, you can add a second absorbent material layer to the lid or use a larger jar with a bigger opening.

In Conclusion:

Making your own DIY water globe is an easy and sustainable way to keep your plants healthy and happy. Plus, it's an attractive and unique addition to your home or office decor. Follow these simple steps, and you'll have a beautiful and functional water globe in no time at all.