1、 Curing method

1. Temperature: it has poor resistance to high temperature and low temperature. The temperature suitable for its development is between 17 and 25 degrees. The limit high temperature is 30 degrees and the limit low temperature is 8 degrees. If the temperature exceeds the limit temperature, the health of the plant will be affected. Therefore, heat dissipation treatment should be done well in high temperature weather. If the temperature is too low, open breeding should be avoided and indoor maintenance should be carried out

2. Watering: it likes humidity and has a great demand for water, but it is not resistant to waterlogging. Before pouring it, you need to observe the state of the soil. If the soil is completely dry, you can. For example, pour it inside. If the soil is wet, don't water it for the time being. The tap water can't be used for irrigation directly after it is put out

3. Fertilization: it grows very fast, especially in the growth period, and consumes nutrients very fast. Relying on the nutrients in the soil alone is not enough, and nutrients need to be supplemented. In addition to chemical fertilizer, liquid nutrient solution or self-made fertilizer can also be used to supplement nutrients. The frequency of use is once a week

4. Light: it needs sufficient light for its growth. The sun is strong at noon in summer and needs shade. It can be illuminated normally at other times

2、 Breeding skills

1. Propagation: its propagation method generally selects the sowing method. The seeds are sprinkled into the prepared soil, watered with water once, and then cultivated in a place with high temperature and weak light. The seedlings can emerge in about a week. When three leaves grow, you can plant them all the time

2. Pruning: in the process of growth, it is inevitable that there will be residual branches and leaves. Once this situation is found, it should be pruned in time to avoid affecting the normal branches

3、 Problem diagnosis

1. Blackened leaves: if the leaves are blackened, it is likely that the light is not enough. At this time, it is necessary to increase the light time. It should be noted that the process of increasing illumination is slow and gradual

2. Rotten roots: if the plant has rotten roots, it needs to dig out its roots, trim the rotten places, and then disinfect with disinfectant. After the incision is slightly dry, it can be replanted into the basin soil