How to Wrap a Potted Plant in Burlap

Burlap is a versatile fabric that can be used to wrap and protect plants in the garden from harsh weather conditions. It provides an effective barrier against frost and wind, and also helps retain moisture in the soil. In this article, we will show you how to wrap a potted plant in burlap to keep it safe and healthy during the winter months.

Step 1: Choose the Right Burlap

Burlap comes in different weights and grades, and choosing the right one is crucial for the success of your plant protection efforts. Look for burlap that is made from natural fibers such as jute or hemp, and ensure that it is tightly woven to provide a good barrier against the elements. Avoid burlap that is too thin or has large holes, as it will not provide enough protection.

Step 2: Measure and Cut the Burlap

Measure the height and circumference of the pot that the plant is in to determine how much burlap you will need. Cut a piece of burlap that is long enough to cover the entire pot and extend several inches above the plant. The extra length will allow you to create a fold over the top of the plant for added protection.

Step 3: Wrap the Plant

Place the burlap over the pot so that the plant is centered and the burlap extends up past the top of the plant by a few inches. Fold the edges of the burlap over the sides of the pot and tuck them under the bottom of the pot to secure it in place. Gently pull the burlap up around the sides of the plant, being careful not to damage any leaves or branches. Wrap the burlap tightly around the plant and use twine or string to tie it in place.

Step 4: Create a Fold Over the Top

To provide added protection against the elements, create a fold over the top of the plant by pulling the burlap up and over the plant until it is a few inches above the top. Fold the excess burlap back down over the plant to create a protective layer. Secure the fold in place with twine or string.

Step 5: Water the Plant

Before you complete the wrapping process, water the plant thoroughly to ensure that it has enough moisture to get through the winter months. Once the wrapping is complete, be sure to water the plant regularly to keep the soil moist.

Step 6: Store the Plant

If you are storing the plant indoors, place it in a cool, dark location such as a garage or basement. If you are leaving the plant outdoors, ensure that it is in a sheltered location away from direct sunlight and wind. Check the plant regularly throughout the winter months to ensure that it is well hydrated and that the burlap is still in place.

Conclusion

Wrapping a potted plant in burlap is a simple and effective way to protect it from harsh winter weather. By following the steps outlined above, you can ensure that your plants will stay healthy and strong throughout the winter months, ready to bloom again in the spring.