1、 Basin loading method

1. Make the leachate layer: its root system is fleshy and afraid of moisture. When you go to the basin, you must make a leachate layer, which is beneficial to the later management and growth. Tiles, broken stones, ceramsite, etc. can be laid at the bottom of the flowerpot

2. Add soil: after the asphalt layer is completed, add soil to the flowerpot. First add a quarter of the height of the flowerpot, and then add an appropriate amount of base fertilizer and soil to mix well. Or mix well and fill it in. The fermented sheep manure, chicken manure, compost or fish meal can be used as the base fertilizer, which can meet the demand

3. Put in the plant: put in the plant in the process of adding soil. When putting in, spread its roots and don't squeeze them together. While filling, gently tap the edge of the flowerpot, so that the root system will be more combined with the soil. After filling the soil, it shall be compacted

4. Watering: after the plant is potted, the root fixing water should be watered in time. It should be watered thoroughly until the water flows out from the bottom of the flowerpot. Then move it to a place with good ventilation and weak light to maintain ventilation. In this environment, the plant will resume growth as soon as possible

2、 Basin changing time

It should be changed in autumn, especially before and after the Mid Autumn Festival. At this time, the temperature is not high or low, and the climate is more suitable, which is conducive to serving the basin and reducing the damage to it. There is not much time for it to change pots. Changing pots in spring will affect flowering, and the temperature is high in summer, which is easy to infect bacteria in the wound. In winter, the temperature is low, the plant is dormant, it is difficult to recover from changing pots, and it is easy to be frostbitten