1、 Watering method

1. Watering time: Milan is usually watered in summer and winter. Therefore, watering in summer should be selected in the morning or evening, so that the water is not easy to evaporate and will not reduce the ground temperature, thus affecting the development of roots. However, watering in winter cannot be done when it is too cold, usually after 10 days in the morning and before 3 pm

2. What kind of water to use: water Milan with river water or rainwater. If it is difficult to collect, tap water can also be used, but it can't be directly watered. The tap water needs to be kept for 1-2 days until the chlorine inside volatilizes. In addition, the water temperature should be controlled to ensure that the water temperature is close to the ambient temperature, so as not to cause damage to the plant

3. How much to water: Milan needs sufficient water for its growth, but it is not waterlogging resistant, so the amount of water should be controlled. Usually keep the basin soil slightly moist, but not too wet. In summer, due to the high temperature and rapid evaporation of water, in addition to watering every day, it is also necessary to spray water around to improve its humidity

2、 What if you pour too much water

If you water Milan too much, you need to drain it in time to drain the excess water. At the same time, strengthen ventilation and loosen the soil properly to let the water in the soil evaporate as soon as possible. If the accumulated water has caused root rot, it is necessary to remove the plant from the pot, trim the rotten root with sterilized scissors, and then replant it in a dry environment