How to Drill Out Tree Stump for Planter

When a tree is removed, the stump is often left behind, which can be an unsightly addition to your landscaping. However, with a little creativity, you can turn the stump into a beautiful planter. In this article, we’ll explain the steps you need to follow to drill out the tree stump for planter.

Step 1: Prepare the area

The first step is to prepare the area where the stump is located. Remove any debris or rocks around the stump, and use a shovel to level the ground. This will make it easier to work around the stump without any obstacles.

Step 2: Cut the stump level

Use a chainsaw or handsaw to cut the stump as close to the ground as possible. This will make it easier to work with and reduce the amount of work you have to do.

Step 3: Drill holes in the stump

Using a drill with a large bit, start drilling holes into the stump. The size of the bit will depend on the size of the stump, but a 1-inch bit should work for most stumps. Drill the holes about 6-8 inches apart, and make sure they are at least 10-12 inches deep.

Step 4: Fill the holes with soil

Now it’s time to prepare the stump for planting. Fill the holes you drilled with soil. You can use a mix of compost, potting soil, and garden soil to create a nutrient-rich base for your plants. Make sure the soil is well packed, and level the surface of the stump.

Step 5: Choose the right plants

The final step is to choose the right plants for your stump planter. You can select plants that are shade-tolerant or prefer full sun, depending on the location of your planter. Some popular plants for stump planters include impatiens, ferns, and succulents.

In conclusion, drilling out a tree stump for planter is a creative way to turn an eyesore into a beautiful addition to your landscaping. By following these steps, you can create a unique planter that is perfect for your outdoor space.