How to Make a Rope Plant Hanger

If you are looking to add some greenery to your home but don't have a lot of floor space, why not try hanging your plants? A rope plant hanger is an easy DIY project that can add a touch of bohemian style to your decor. In this article, we will show you how to make a rope plant hanger in a few simple steps.

Materials You Will Need:

- 100 feet of cotton rope, approximately 1/4 inch diameter

- Scissors

- Measuring tape

- Wooden dowel, 1 inch diameter and 18 inches long

- Paint or wood stain (optional)

Step 1: Cut Your Rope

Cut four equal lengths of rope, each approximately 25 feet long. You can adjust the length depending on how long you want your plant hanger to be.

Step 2: Knot the Rope

Fold each rope in half and tie a knot at the end, creating a loop. Make sure all four loops are roughly the same size.

Step 3: Mount the Dowel

Lay the dowel on a flat surface and measure the center point. Take one set of loops and place them on top of the dowel, with the string ends hanging straight down. Repeat with the other set of loops, positioning them on the dowel opposite the first set. Adjust the loops so they are evenly spaced, then tie a knot at the top of each set of loops to secure them on the dowel.

Step 4: Begin the Knotting Process

Take two adjacent pieces of rope from one set of loops and tie an overhand knot about 6 inches from the top knot. Repeat with the remaining two ropes in the set, placing the second knot about 2 inches below the first. Now, you should have two pairs of knots.

Step 5: Create the Spiral Pattern

To create the spiral pattern, take the left rope from one knot and the right rope from the adjacent knot, and tie them together using a square knot. Make sure the knot is tight and rests against the knots above it. Repeat with the remaining ropes until you have a long spiral.

Step 6: Create the Second Tier

Once you have a long spiral, tie an overhand knot about 6 inches below the last square knot. Repeat the knotting process to create a second tier of knots. You can choose to create as many tiers as you like, depending on how long you want your plant hanger to be.

Step 7: Create a Basket

When you have finished knotting, you should have a long net of rope. To create the basket for your plant, fold the rope in half at the bottom of the spiral and tie an overhand knot about 6 inches from the fold. Repeat the knotting process with each individual rope until you have a tight basket.

Step 8: Finish Your Plant Hanger

Trim any excess rope below the basket and comb out any loose fibers. If desired, you can paint or stain the dowel to match your decor. Finally, insert your potted plant into the basket and hang your rope plant hanger in a sunny spot. Enjoy the beauty of your new creation!

In conclusion, making a rope plant hanger is a fun DIY project that can add a touch of personality to your home decor. With just a few materials and some simple knotting techniques, you can create a beautiful and unique way to display your favorite plants.