Branch inserting method

Preparation before cutting

First, choose a good substrate, vermiculite or perlite, but choose ordinary soil and river sand in the family. Disinfect the soil before cutting. Soak the soil in 0.5% potassium permanganate solution, take it out for about 30 minutes, and dry it in the sun

Select cuttings

Cut a branch from the mother plant, with a length of 10 ~ 15 cm. The branch should have two branches, with a few leaves at the top, and cut off the leaves at the base

Cutting

The base of the branch should be quickly dipped in naphthylacetic acid solution and then cut to a depth of about 5cm. The spacing shall be subject to the fact that the blades do not contact each other

After cutting, pour enough water, and then cover with plastic film to moisturize. Control the temperature between 20 ~ 25 ℃ and the humidity between 80% ~ 90%. Rooting can take place 20 ~ 30 days after transplanting. After rooting, reduce the amount of water spraying and watering, and remove the plastic film. Cuttings grow slowly. After cuttings survive, they first grow in the original container and wait until spring

Rooting method

Preparation before insertion

The soil requirements are the same as those of cuttings, but the materials of cuttings are slightly different. Root cuttings are the rhizomes that are broken when selecting ramets, which can be regarded as leakage picking. The limitation of this method is that unless you pull some fibrous roots from the roots of the plant, it is impractical to reproduce by relying on the broken roots of the ramet

Operation method

Root cuttings are carried out in combination with ramets in autumn. Cut off the root segment of 5 ~ 10cm, insert it into the soil, cover it with 5 ~ 10cm fine soil, and then pour it through