Ramet method

First of all, if conditions permit, the greenhouse with temperature control equipment can carry out ramet reproduction almost all year round

We can configure the pot soil by ourselves. We can mix the prepared rotten leaf soil and peat soil, such as part of perlite and sand, and add an appropriate amount of base fertilizer to keep it witty and fertile. At the same time, pay attention to the loose and breathable soil, which is not easy to accumulate water

Then there is the maintenance during the growth period. It is best to apply topdressing once every half month during the growth period

The water that has been deposited in the pond for 1 ~ 2 days shall be used for watering, and watering shall be controlled in winter

Temperature change directly affects the color of leaves, and the appropriate temperature is 15 ~ 20 ℃. Purple edge Jasper is afraid of heat. In the hot summer, it can be sprayed under the shade to cool down the purple edge Jasper. In addition, overheating and excessive humidity will cause the stems and leaves to turn black and rot, affecting the normal growth of purple edge Jasper. Therefore, the water should be properly controlled when watering, not too much or too little. Place in a place with sufficient light in winter and avoid direct sunshine in summer

Leaf cutting propagation

Purple Jasper can also be inserted into leaves. During the period from May to June, you can choose to use leaf insertion for propagation. In addition, the inserted leaves can not only be a leaf, but need to have a petiole of about 1cm. Cut the leaves with a knife, dry them and insert them obliquely on the prepared sand bed or substrate to 1 / 3 of the leaves. It is OK to use river sand as the substrate. Keep the substrate moist and the range of air humidity. It will take about 10-15 days to take root