Red wine bottles and beer bottles are used as hanging pots for green pineapples

How about this green pineapple hanging basin made of flowers? The key is that it's really simple~

▼

Material:

A red wine bottle, a piece of rope, alcohol (gasoline and lubricating oil can also be used), a chopstick, 502 glue, a clothes hanger, iron wire, white cloth in the shoe box, water moss (rags or dried leaves can also be used)

Steps:

1、 Cut bottle part

1. Soak the wine bottle in water for two hours and remove the paper package from the bottle. Then tie the rope to the place to be cut (the rope should be tied tightly)

▼

2. Use chopsticks to drip alcohol around the rope and light the fire

▼

3. After the rope burns out, immediately immerse the part of the bottle to be cut into cold water

▼

4. If the fire is sufficient, the part to be cut will fall off as soon as the cold water is fed in. If the fire is insufficient, there will be cracks at the place where the rope is tied. Wrap it with a soft cloth and knock at the corner of the table, and the bottom will fall off

▼

5. Apply a layer of 502 glue to the incision to avoid cutting your hand. (or grind the cut with sandpaper)

▼

2、 Make internal structure part

6. Make the hanger into several small hooks in the shape shown below. The actual length of the red scribed part in the figure below is the radius of the wine bottle

▼

7. Draw the bottom of the bottle on white paper and put the small hook in

▼

8. Fix the small hooks together with wire

▼

9. Knead the rest of the hanger into a ball, which is larger than the mouth of the bottle

▼

10. The kneaded dough is assembled with a small hook, as shown in the figure below

▼

11. Assemble into a bottle

▼

Bottom view of bottle bottom

3、 upper basin

12. Cut the white cloth in the shoe box into strips, put it into the bottle and compact it with chopsticks

▼

13. The mouth of the bottle is facing down and contains water moss. (it can be replaced by rags or dead tree leaves)

▼

14. When loading soil, the water moss can be padded on the edge of the bottle, so that the soil can not be seen from the outside of the bottle, which increases the beauty

▼

15. After the soil is installed, plant green pineapple, hanging bamboo plum and so on according to your preferences

▼

16. After planting the green pineapple, leave a space of about 4cm and spread a layer of water moss

▼

17. Cut a white cloth and insert it from the bottom of the bottle, as shown in the figure below

▼

18. Hang up the bottle and draw out the white cloth at the mouth of the bottle

▼

Dangdang ~ hanging in the balcony living room, is it much more beautiful than the monotonous green Luo flowerpot! Although there are many operation steps, Huahua thinks they are very simple~

Plastic bottle as flowerpot

This flowerpot like a work of art is actually made of plastic bottles

▼

Material:

Several branches, a plastic bottle, thin thread, scissors

▼

Steps:

1. Cut the branches into short wooden sticks, and the length is determined according to the height of the flowerpot

▼

2. Cut off the bottom of the plastic bottle, the height must be shorter than the wooden stick, and then pierce the hole at the bottom of the bottle

▼

3. Tie one end of the stick with thread

▼

4. Take another wooden stick and wind it twice with a thread so that it is next to the first one. In this way, tie all the wooden sticks together

▼

5. Then tie one end of the stick in the same way as above, but the winding direction should be opposite to that of the other end, otherwise it will fall apart

6. Stick the bound branches to the bottom of the plastic bottle with solid glue, and then tie them with thread

▼

7. Is it better to plant flowers on the earth than a bare plastic bottle

▼

A plastic bottle is too monotonous? Huahua teaches you to make a three-dimensional garden with plastic bottles

▼

Material:

Several plastic bottles, ropes, scissors, knives

Steps:

1. Cut a rectangular hole in the bottle with scissors and knife

▼

2. Cut four holes through the rope at the edge of the cut

▼

3. Thread the plastic bottles with a rope, as shown in the figure below

▼

4. Fill plastic bottles and plant flowers

▼

When it's done and hung on the wall of the living room, isn't it different immediately, and the combination of multiple plastic bottles is much better than a single plastic bottle

▼

Make flowerpots from milk powder cans

These very fresh flowerpots below are made of milk powder cans

▼

Material:

Milk powder jar, colored paper (wallpaper can also be used), colored pen, double-sided adhesive tape

Steps:

1. Use a screwdriver and hammer to punch holes in the bottom of the jar

▼

2. Cut out colored paper of the same size according to the size of the jar

▼

3. Stick the colored paper on the can with double-sided tape

▼

4. Write words or draw patterns on the can body with a colored pen

▼

5. Then plant cute meat on the soil

▼

Make Swan flowerpot with detergent bottle

Isn't this little swan exquisite? It's a flowerpot made of detergent bottle

▼

Material:

Detergent bottle, scissors, button, pen

Steps:

1. Mark the bottle with a pen and cut it with scissors according to the mark

▼

2. Then draw the shape of Swan's head at the handle of the bottle, cut it with scissors according to the shape, and cut the swan's tail with scissors according to the figure below

▼

3. Glue the button on the white mark to make Swan eyes. Then the Swan flowerpot is ready

▼

4. Finally, just plant flowers

▼

Waste bottles and cans

The flowerpots are made like works of art

Are you excited

Follow Huahua and do it