Ramet propagation of Aegilops tenuifolia

It is necessary to change pots in combination with ramet propagation

The method is: separate the plants with thin snow and perennial grass. When separating, you can break them off by hand or cut them off with scissors. Be careful not to damage other stems and plants

The cut ramets can be soaked in water for a while, then taken out, and then dried in the shade

When it is dry, plant it in each prepared pot

Pay attention to placing it in a warm environment with light and ventilation for maintenance

Cutting propagation of Aegilops tenuifolia

1.select a strong mother plant and select healthy branches for cutting. The length should be more than 10cm

2.also pay attention to remove the small leaves on the bottom side of the note. In order to prevent them from being buried in the soil and rotting during cutting, which will affect the growth and health of the plant

3.put the cut cuttings in a cool place to air for a day and ventilate until they are dry

4.prepare the basin soil, and prepare the fluvo aquic soil with soft soil, which is conducive to the germination and rooting of cuttings without pouring too much water

5.after drying, the pot should be put on. Don't be too dense when putting on the pot. It's best to separate cutting. Don't pour too much water after cutting

6.after cutting, it should be placed in a place with light and good ventilation for maintenance

The cutting propagation of thinxuewannian grass is the easiest to survive. As long as the cuttings are inserted into the soil, they can survive and grow. This propagation method is also the most commonly used

Well, Xiaobian has told you the breeding method of Poxue evergreen. You might as well try it< span>