Spring curing method of yuweng

In spring, when the indoor temperature rises to more than 10 degrees, it is suitable to change the basin, and then trim it properly. When changing the basin, it should be noted that the basin soil should be loose and fertile sandy soil with good drainage. At the beginning of the replacement season, water is not sprayed, only spray is kept, and the moist environment is kept. After half a month, a small amount of water can be watered, and then the amount of water can be increased gradually to meet the growth needs of plants. Yuweng is mostly placed in sunny and non rainy places in spring to control the amount of watering

Summer curing method of yuweng

As far as the habit of yuweng is concerned, he likes light, but he can't shine too much. Therefore, in summer, the placement of yuweng should be determined according to the specific weather conditions, which should not only ensure sufficient light, but also avoid the explosion of sunlight, but also maintain the humid growth environment of yuweng

Autumn curing method of yuweng

While maintaining the light, pay attention to watering the inter dry wetland when the temperature is suitable. In autumn, we should pay special attention to reducing the amount of water after the weather turns cool. Especially after the indoor temperature drops below 10 degrees, we must increase the temperature and light. It is best to place it on a closed balcony with light to avoid frostbite

Winter curing method of yuweng

In terms of the cold intolerant habit of yuweng, the focus of yuweng maintenance in winter is temperature and light. We must ensure sufficient light and improve the indoor temperature. In addition, the watering amount should be strictly controlled to keep the basin soil dry. Avoid the growth stagnation and flowering delay of yuweng caused by low temperature< span>