You have to make some small moves to raise flowers, otherwise why do your flowers grow well

Author:JamesZ Date:2022-04-05 21:24

Watering is a necessary thing for raising flowers, but if you want to water the flowers well, in addition to using clean water, you'd better add something when watering, so as to make the flowers grow well!

Water and vinegar

Vinegar contains a certain concentration of acetic acid, glucose, lactic acid and other components, which can supply substances needed for plant growth and adjust the pH of soil

flowers and plants

Method of use

1. Gardenia and jasmine like acidic soil, but they are particularly prone to yellow leaves during maintenance in the north. Adding 5 ‰ vinegar when watering can change the alkalinity of the soil. After about 4-5 times, the yellow leaves can turn green

2. Use 150 times of vinegar to treat rhododendron leaf spot

3. Don't choose noon when watering flowers with vinegar, because the temperature is high at noon and the water is easy to evaporate, which will increase the concentration of vinegar and damage the plant

Water and add some sugar

Sugar solution is conducive to the activities of microorganisms and can promote the growth of roots. The rooting water made of white sugar water is useful for woody and herbal flowers, such as rose, osmanthus, camellia, longevity flower, etc

flowers and plants

Method of use

1. Mix the white sugar and water evenly in the ratio of 1:9. The water for dissolving the white sugar can use hot water, which can accelerate the solution speed

2. Cut the branches, remove the lower half of the leaves, soak them in normal temperature sugar water for an hour, and then rinse them with clean water

Water with aspirin

Aspirin must be familiar to everyone. It is a common drug used to treat headaches. Aspirin contains Salicylic Acid and acetic acid, which can effectively protect the water in plant cells from loss, thus playing the role of root protection and root cultivation. Therefore, it is known as the increasing production spirit of plants

flowers and plants

Method of use

1. Dissolving one tablet (0.5g) of aspirin with 1kg of water and spraying the stems, branches and leaves of plants with the mixed solution can reduce the evaporation of plant water; Or pouring the solution into the flowerpot can promote the stomatal closure of leaves, reduce high-temperature burns and improve the drought and cold resistance of plants

2. Plants that change pots are particularly easy to damage their roots and affect their water absorption capacity. You can use 2 aspirin to mix 0.5kg of water, soak the roots for 3-5 hours, and then put them in the pot, which can improve the survival rate

3. When cutting, soaking in 0.05% aspirin solution for 4 hours before cutting can improve the survival rate of cutting

Water and add some baking soda

Baking soda is often used in our life, but you can't imagine that baking soda can also raise flowers

flowers and plants

Method of use

1. Mix baking soda and water in the ratio of 1:5000, and then wait until the flowers at home are about to bloom. Pour baking soda on them to make the flowers bloom bigger and bigger and the color more bright. For example, Hydrangea and Begonia can use this method

2. Using 1 ‰ baking soda powder to make a solution and spray it on the leaves of plants can treat powdery mildew of roses, cuckoos and other plants

3. Many people like to Rett fertilizer at home, but the retted fertilizer tastes smelly. At this time, you can add a little baking soda to reduce the odor

Water and some beer

Beer contains a lot of carbon dioxide, which is essential for the metabolism of various plants and flowers. Therefore, watering flowers with beer has a good effect

flowers and plants

Method of use

1. Mixing beer and water in the ratio of 1:100 for watering flowers can adjust the pH of the soil. It is good for plants that like acidic soil, such as gardenia and Rhododendron. It can allow plants to absorb sufficient nutrients, so as to grow luxuriantly and have big and colorful flowers

2. After mixing beer and water according to the ratio of 1:2000, spray it on the leaves of plants. Spray it once every 3 weeks or so to make the leaves of plants shiny. When spraying, remember to spray on both sides, because there are pores on both sides of the leaves, which can promote absorption

3. After dipping beer with absorbent cotton or soft cloth, gently wipe the leaves, which can not only remove dust, but also make the leaves absorb nutrients, make the leaves more green and shiny, but also appear more plump. For example, green pineapple and Clivia can be used

Water and add some ferrous sulfate

Flowers like gardenia and Rhododendron generally prefer acidic soil. Many soils in the north are alkaline. At this time, ferrous sulfate should be used to improve the pH of the soil

flowers and plants

Method of use

1. Mix ferrous sulfate and clean water in the ratio of 1:1000, and then water the flowers directly. You can use a watering can to spray on the leaves, or you can water directly into the flowerpot

2. Mixed with rotten organic fertilizer and ferrous sulfate, the general ratio is 1:500, it can be made into alum fertilizer water, which is most suitable for watering flowers in acid soil such as gardenia and Rhododendron

Potassium dihydrogen phosphate watering point

The composition containing phosphorus and potassium can not only supplement the phosphorus and potassium needed by plants, but also make the flowers bloom bigger and more beautiful

flowers and plants

Method of use

1. The ratio of potassium dihydrogen phosphate to water is 1:1000, which can be poured directly into the flowerpot

2. Spray the mixed proportion of potassium dihydrogen phosphate solution on the plant with a watering can. It can promote flowering when the plant is not flowering

Bean cake water

Bean cake water is produced after the fermentation of bean cake and water. It is rich in nitrogen and is very suitable for watering flowers

flowers and plants

Method of use

1. Crush the bean cake into powder, and then add water to mix

2. Into a closed container

3. After sealing, fermentation can be carried out. Putting it in the sun can promote fermentation. When the liquid turns black and brown, the fermentation is successful

4. After fermentation, dilute with water, the general ratio is 1:200, and water the flowers directly

These things can be seen everywhere at home

You flower friends might as well have a try~

(Note: the pictures come from the Internet and the copyright belongs to the original author. Due to restrictions, some pictures cannot be found and the author has not been marked. If your rights and interests are infringed, please contact Huahua wechat qdxixi or qq1273160598 for deletion or copyright payment.)< span>

© Copyright Theflowerwiki.Com. All Rights Reserved. Sitemap DMCA Privacy Policy Novelhall Youbrief
Top

You have to make some small moves to raise flowers, otherwise why do your flowers grow well

JamesZ
2022-04-05 21:24
Description Watering is a necessary thing for raising flowers, but if you want to water the flowers well, in addition to using clean water, you'd better add something when watering, so as to make the flowers grow well!

Water and vinegar

Vinegar contains a certain concentration of acetic acid, glucose, lactic acid and other components, which can supply substances needed for plant growth and adjust the pH of soil

flowers and plants

Method of use

1. Gardenia and jasmine like acidic soil, but they are particularly prone to yellow leaves during maintenance in the north. Adding 5 ‰ vinegar when watering can change the alkalinity of the soil. After about 4-5 times, the yellow leaves can turn green

2. Use 150 times of vinegar to treat rhododendron leaf spot

3. Don't choose noon when watering flowers with vinegar, because the temperature is high at noon and the water is easy to evaporate, which will increase the concentration of vinegar and damage the plant

Water and add some sugar

Sugar solution is conducive to the activities of microorganisms and can promote the growth of roots. The rooting water made of white sugar water is useful for woody and herbal flowers, such as rose, osmanthus, camellia, longevity flower, etc

flowers and plants

Method of use

1. Mix the white sugar and water evenly in the ratio of 1:9. The water for dissolving the white sugar can use hot water, which can accelerate the solution speed

2. Cut the branches, remove the lower half of the leaves, soak them in normal temperature sugar water for an hour, and then rinse them with clean water

Water with aspirin

Aspirin must be familiar to everyone. It is a common drug used to treat headaches. Aspirin contains Salicylic Acid and acetic acid, which can effectively protect the water in plant cells from loss, thus playing the role of root protection and root cultivation. Therefore, it is known as the increasing production spirit of plants

flowers and plants

Method of use

1. Dissolving one tablet (0.5g) of aspirin with 1kg of water and spraying the stems, branches and leaves of plants with the mixed solution can reduce the evaporation of plant water; Or pouring the solution into the flowerpot can promote the stomatal closure of leaves, reduce high-temperature burns and improve the drought and cold resistance of plants

2. Plants that change pots are particularly easy to damage their roots and affect their water absorption capacity. You can use 2 aspirin to mix 0.5kg of water, soak the roots for 3-5 hours, and then put them in the pot, which can improve the survival rate

3. When cutting, soaking in 0.05% aspirin solution for 4 hours before cutting can improve the survival rate of cutting

Water and add some baking soda

Baking soda is often used in our life, but you can't imagine that baking soda can also raise flowers

flowers and plants

Method of use

1. Mix baking soda and water in the ratio of 1:5000, and then wait until the flowers at home are about to bloom. Pour baking soda on them to make the flowers bloom bigger and bigger and the color more bright. For example, Hydrangea and Begonia can use this method

2. Using 1 ‰ baking soda powder to make a solution and spray it on the leaves of plants can treat powdery mildew of roses, cuckoos and other plants

3. Many people like to Rett fertilizer at home, but the retted fertilizer tastes smelly. At this time, you can add a little baking soda to reduce the odor

Water and some beer

Beer contains a lot of carbon dioxide, which is essential for the metabolism of various plants and flowers. Therefore, watering flowers with beer has a good effect

flowers and plants

Method of use

1. Mixing beer and water in the ratio of 1:100 for watering flowers can adjust the pH of the soil. It is good for plants that like acidic soil, such as gardenia and Rhododendron. It can allow plants to absorb sufficient nutrients, so as to grow luxuriantly and have big and colorful flowers

2. After mixing beer and water according to the ratio of 1:2000, spray it on the leaves of plants. Spray it once every 3 weeks or so to make the leaves of plants shiny. When spraying, remember to spray on both sides, because there are pores on both sides of the leaves, which can promote absorption

3. After dipping beer with absorbent cotton or soft cloth, gently wipe the leaves, which can not only remove dust, but also make the leaves absorb nutrients, make the leaves more green and shiny, but also appear more plump. For example, green pineapple and Clivia can be used

Water and add some ferrous sulfate

Flowers like gardenia and Rhododendron generally prefer acidic soil. Many soils in the north are alkaline. At this time, ferrous sulfate should be used to improve the pH of the soil

flowers and plants

Method of use

1. Mix ferrous sulfate and clean water in the ratio of 1:1000, and then water the flowers directly. You can use a watering can to spray on the leaves, or you can water directly into the flowerpot

2. Mixed with rotten organic fertilizer and ferrous sulfate, the general ratio is 1:500, it can be made into alum fertilizer water, which is most suitable for watering flowers in acid soil such as gardenia and Rhododendron

Potassium dihydrogen phosphate watering point

The composition containing phosphorus and potassium can not only supplement the phosphorus and potassium needed by plants, but also make the flowers bloom bigger and more beautiful

flowers and plants

Method of use

1. The ratio of potassium dihydrogen phosphate to water is 1:1000, which can be poured directly into the flowerpot

2. Spray the mixed proportion of potassium dihydrogen phosphate solution on the plant with a watering can. It can promote flowering when the plant is not flowering

Bean cake water

Bean cake water is produced after the fermentation of bean cake and water. It is rich in nitrogen and is very suitable for watering flowers

flowers and plants

Method of use

1. Crush the bean cake into powder, and then add water to mix

2. Into a closed container

3. After sealing, fermentation can be carried out. Putting it in the sun can promote fermentation. When the liquid turns black and brown, the fermentation is successful

4. After fermentation, dilute with water, the general ratio is 1:200, and water the flowers directly

These things can be seen everywhere at home

You flower friends might as well have a try~

(Note: the pictures come from the Internet and the copyright belongs to the original author. Due to restrictions, some pictures cannot be found and the author has not been marked. If your rights and interests are infringed, please contact Huahua wechat qdxixi or qq1273160598 for deletion or copyright payment.)< span>

More
Related articles