Preparation of lavender bed cutting

When cutting, select a well shaded space to control the light intensity to 45% to 55%. Perlite and other soils with good water permeability and drainage effect are mostly used as cutting beds. Before cutting, the cutting bed shall be turned over once. After turning over, the sundries shall be cleaned up. After cleaning, cutting can be carried out

Operation specification for cutting of Tradescantia

Select 8-10cm plants when selecting mother seedlings, and manually peel the cuttings from the trunk for cutting. After cuttings survive, transplanting is carried out, and the spacing of each seedling is kept at 10cm, which is beneficial to plant growth. After all cuttings, pay attention to spray enough water with a watering can and shade it

Pay attention to moisture control after cutting to ensure that the soil of cutting bed is wet. After 4 days, the watering can be appropriately reduced to keep the soil surface dry and promote rooting. Half a month later, most of the plants have taken root. Do not apply fertilizer to the cutting bed, but spray it with nutrient solution. Generally, urea with mass concentration of 0.2% can be used. When the new root grows to 5cm, pay attention to transplanting, and the specification is 60cm × 40cm, avoid damaging new roots during transplanting. Open cutting is usually carried out in spring and summer, and cutting in greenhouse can be carried out in four seasons< span>