Jujube grafting:

Time:

Grafting is most suitable from early April to early May; The signal of grafting start was better when the temperature reached 13-15 ℃ in spring

Scion:

The female parent tree shall be healthy and free from freezing injury. The branches shall be mature enough. The scion shall not be scalded during wax sealing, and shall not lose water or mildew during storage

Rootstock:

Be healthy without injury or freezing injury

Basic steps of jujube grafting:

1. First, prepare the cleaned anvil pile and remove the burrs generated during sawing, which is more conducive to healing

2. Then split the rootstock, about 4 cm deep

3. Next, cut the scion, and cut the lower end of the scion into a 45 degree angle with a little arc shape. Remember to peel off the skin about half the diameter of the scion

4. Insert the scion into the prepared groove of the rootstock. At this time, carefully align the cambium on both sides of the scion with the cambium on both sides of the rootstock

5. Next comes the binding step. If you don't have grafting belt, you can use agricultural film as shown in the figure below

6. The last step, bagging

It's done. Then you can wait for the graft to survive< span>