Mint

Peppermint is definitely the first choice for flowers that must be raised in summer. It is not only good to raise and look good, but also has a faint fragrance, refreshing and refreshing. It can also be used to cook and make tea occasionally. It's really not enough to raise 100 pots. In fact, it can reproduce 100 pots without buying a few branches

1. Use sharp scissors to cut several strong and healthy Mint branches, each about 8-10cm, leaving 3-5 leaves

2. Remove the leaves at the lower end of the mint, insert the mint branches into the hydroponic flask, and ensure that the bottom of the branches is 1-3cm immersed in water

3. Put the cutting hydroponic bottle in a place with astigmatism and ventilation, change the water once every two days, and you can take root in less than five days

4. After the root system of peppermint grows, we can turn to soil culture. The soil selects loose and breathable rotten leaf soil, mixed with perlite, and watered twice

Later maintenance

Peppermint likes humidity and light. Usually, keep the soil moist by basking in the sun, but don't accumulate water. In addition, keep more ventilation and pinch the tip. When you see that peppermint is growing higher, pinch it quickly. The more you pinch the lateral buds, the easier it is to burst the basin

Green Rose

Summer is also a good season for hydroponics. Pinch roots and branches and throw them into the water. They will take root in about a week, clean and refreshing

1. Cut the branches of green pineapple. It's best to take root like the following figure. It takes root faster

2. The cut branches of green pineapple should not be too long, no more than 15 cm. Cut obliquely to increase the water absorption area and improve the activity of branches

3. Insert the branches of green pineapple into the hydroponic flask to ensure that 1 / 4 of the branches and air roots are immersed in water and placed in a place with astigmatism and ventilation

4. In less than a week in summer, white roots can be sent out. When the water level is low, add water to keep the water level in the hydroponic flask no less than 1 / 4

Daily maintenance

After rooting, if you want to grow fast in hydroponic culture, you can't expose to the sun or hide for a long time, and it's best to keep the astigmatism environment; In addition, you can usually add some fish tank water or a few slow-release fertilizer particles to the bottle, and the green rose will grow slowly

Chlorophytum

Hydroponic Chlorophytum is no stranger to everyone. If a small Chlorophytum sprouts from the branches of your Chlorophytum, you can pick it by hand and insert it into the hydroponic bottle

1. When cutting off Chlorophytum, you'd better choose the one with roots under the small Chlorophytum. This kind of Chlorophytum is better to feed, but it doesn't matter if it doesn't have roots. It can also live

2. Put the small Chlorophytum on the hydroponic bottle and touch a little water at the bottom. The beer pop-up can after drinking is the most suitable. Fill the pop-up can directly with water, and put the root of the small Chlorophytum at the position of the pull ring mouth

3. After taking root, Chlorophytum can continue to be cultivated in water or in soil

Daily maintenance

Chlorophytum likes astigmatism environment. In summer, it can be placed on the East and West balconies and bright living rooms. It can grow well without watering and ponding to ensure ventilation

Ivy

Ivy is also a common indoor green plant. Cutting is simple. Water cutting is easier to take root and maintain than soil cutting

1. Cut off the branches of ivy, about 10-15 cm in each section, and remove the leaves at the lower end

2. Pour about 1 / 2-1 / 3 of water into the hydroponic flask, and then insert Ivy into the hydroponic flask

3. If your hydroponic bottle has a large caliber and is difficult to fix, you can use a hard paper shell to poke several holes, then insert Ivy branches into the hole, and then put the hard paper shell at the mouth of the bottle

3. In a few days, Ivy will grow roots. You can continue hydroponic culture or turn to soil culture

Daily maintenance

Before and after rooting, spray water on the leaf surface to moisturize, and put it in an astigmatic and ventilated environment. Don't expose it to the sun

Peony Chlorophytum

Peony Chlorophytum is easy to raise, and it grows very fast in summer. If you see someone raising it when visiting relatives and friends, you might as well ask for some branches to take home to raise it. It's easy to raise it

1. When pinching the branches of peony Chlorophytum, it's best to use a sharp knife, and the blade should be disinfected with alcohol in advance

2. Use a knife to cut off several strong branches of the peony Chlorophytum. It doesn't matter how long it is, but it can live

3. Cut the upper end of each branch into flat mouth and the lower end into oblique mouth, and then put it in a cool and ventilated place to dry for about half an hour. Don't touch the water

4. Put the dried peony Chlorophytum branches in the hydroponic flask and pour water to ensure that the lower end of the branches can be immersed in water for 3-4cm

5. Put the cuttings in a cool and ventilated place. They can take root in about 5 days in summer. Change the water once 2 days before taking root and once 4-5 days after taking root

6. After rooting, the peony Chlorophytum can be hydroponically cultivated or transplanted into the soil. Slowly see the scattered light and spray more water on the leaf surface, it will grow fast and the leaves will be green

Daily maintenance

Peony Chlorophytum likes to be wet. After growing roots, keep the watering frequency of no drying and no watering. Spray water on the leaf surface to moisturize, and put it in places with sufficient light such as nanyangtai and living room

Drug herb

Drug herb looks like mint, so it is also called wrinkled leaf mint. It can give off a fragrance similar to lemon. It can also absorb formaldehyde, carbon monoxide, benzene and other toxic gases. Pinch a branch and throw it into the water in summer. It will soon take root and grow into a waterfall

1. It is also easy for drug addicts to reproduce. They use scissors to cut off several branches, each about 10 cm long

2. Take off the leaves at the lower end of the drug abuse grass branches, and then insert them into the hydroponic flask to ensure that 1 / 3 of the branches are immersed in water

In 3.3-5 days, the drug abuse grass will produce roots. At this time, you can choose to continue hydroponic culture or transplant into the soil

Daily maintenance

Drug addicts prefer water. If they are raised in the soil, they should keep the soil slightly moist in summer. They should be watered once in about three days. If they want to grow fast, they can also be watered with fermented rice washing water. At ordinary times, it can be placed in sunny places such as Nanyang terrace and east-west balcony, with appropriate shade in summer

Swedish Ivy

Swedish ivy is also a good feeding flower. Its leaves are round and grow fast, and it can also produce beautiful flowers. Flowers like it very much

1. Cut the branches of Swedish Ivy into small sections, each section of 3 pairs of leaves

2. In the process of cutting Swedish Ivy branches, those with small white spots on the back have the fastest rooting. In the cutting process, small white spots can be divided at the lower end of the cutting branches, which is more conducive to rooting

3. Insert the branches into the water and immerse the lower end 1-2cm into the water. It is best to dip a small white spot into the water

4. In a few days, the branches will take root and can be transplanted into the soil at this time

Daily maintenance

Swedish Ivy likes to scatter light. Don't direct sunlight in summer, let alone long-term shade, otherwise it will cause yellowing or overgrowth of branches and leaves. Water 1-2 times a week in summer to keep the basin soil moist. In addition, be sure to ensure good ventilation conditions, and add some organic fertilizer to the basin bottom in spring and autumn

Douban green

Watercress green can be inserted into leaves or branches. Water can root faster and have the highest survival rate. If the soil is not disinfected, it is easy to rot

1. Cut off the green and healthy branches of watercress and put them on the hydroponic flask. The water level should not be too high. Just touch the water at the bottom of the branches

2. Watercultured watercress green, keep the water clean, and change the water once every two days. The water should be the same as outdoor, not too cold

3. After rooting, you can use the matrix mixed with nutrient soil, perlite and vermiculite to put watercress green into the basin

Daily maintenance

Watercress green is drought resistant and does not need to be watered too frequently. When it is light, it can be watered again to keep scattered light and spray water on many leaves

Touch incense

Touch incense is also a flower that is easy to grow wildly, and its branches are easy to live with water

1. The touch incense inserted by water should be placed in a place with sufficient light. If the light is insufficient, the roots are slow, and the branches and leaves are easy to turn yellow. The branches inserted by water must not have leaves

Change the water once every 2-3 days to ensure that the water quality is clean. After growing roots, it can be cultivated in soil

Daily maintenance

Bumpy incense likes an environment with sufficient light. It doesn't need shade in summer. In addition, it ensures moisture. When you touch the soil surface, you can pour it when it is dry, and it grows very fast

Copper coin grass

Such as copper coin grass, it is a model of living with water! If the light is better, it's just a minute

1. Cutting with the leaves of Herba Coptidis can't live. The stolons of Herba Coptidis must be picked to live

2. Dig out some stolons and associated roots in the soil of tongqiancao. It doesn't need to be too much. Just 2-3 sections. When digging, bring some soil as much as possible

3. Find a watertight basin or shallow dish, put half the soil at the bottom, and then pour it with water

4. Plant the stolons and associated roots in the soil and put them in a place with sufficient light

Daily maintenance

Soon, small leaves of Pennisetum will grow on the stolon. As long as there is no water shortage in the basin and sufficient light, the basin will burst within 2-3 weeks

Rieger Begonia or four seasons Begonia

Although the maintenance of Rieger Begonia and four seasons Begonia is not so easy, cutting is very simple. Basically, you can live by pinching roots and branches

1. Healthy Rieger Begonia branches shall be selected, and unhealthy branches such as stem rot and black stem shall not be used

2. Divide the branches, about 10cm in each section, and dry them in a place with astigmatism and ventilation for 20-30 minutes

3. Insert the bottom of the dried branches into the hydroponic flask. The fastest way is to touch a little aquatic roots at the bottom, about 0.3-0.5cm. It is easy to rot if immersed in the water level too deep

4. About a week or so, roots will grow at the lower end of the branches. You can continue hydroponic culture or soil culture. Before rooting, ensure that the water quality is clean and change the water once every 2-3 days

Daily maintenance

Rieger Begonia is afraid of damp and heat. In summer, it is maintained in a cool place with astigmatism, and about half of the light is covered. Reduce watering. Water it when the basin is very light. In addition, don't water it on the leaves