Preparation materials:

1. Flowerpot: my size is 10 × ten × A 10cm plain pottery basin has good air permeability and water permeability

2. Bark: try to find a broken bark

3. Sawdust and Dendrobium seedlings

Potting steps:

Step 1: put the Dendrobium seedlings into the flowerpot, and then fill the flowerpot with bark and sawdust. The bark and sawdust can reach the top of the root of the plant. Don't bury the root too deep

Step 2: prepare to water. It is best to use a watering pot to drench all the bark and sawdust, but do not let water accumulate in the flowerpot. Pay attention to its drainage

Step 3: fertilization method: as long as the fertilizer is applied in the early spring and the end of autumn every year, the amount of fertilizer is about 10 to 15 grains. The fertilizer should be diluted before fertilization, and the fertilizer can be applied twice a year without additional fertilization

Step 4: if diseases and pests are found, they can be cleared manually when they are light, but in serious cases, not only all the damaged places should be cut off, but also the corresponding fungicides and pesticides should be used to completely remove them. After cutting off the damaged area, soak the cut with clean water for a while and replant it into the flower pot

Step 5: when choosing the location for the potted Dendrobium, try to choose the place with sunshine. If you can't accept the whole day sunshine, you should ensure that you are in the sun for a short period of time every day. However, proper shading should be done at noon in summer

Precautions:

In winter, if the bark and sawdust of the lower part of the flowerpot are wet, do not water the upper part even if it is dry. You can spray water directly on the plants. Wait until the bark and sawdust are all dry before watering