Succulent hydroponic root induction

Every time when cutting head, it is not easy for meat to take root and survive. At this time, the method of water insertion can be used to induce roots with more meat, so as to grow white roots

Operation steps:

1. For those fleshy, we can behead the fleshy and cut off the fleshy head with sharp scissors

2. Put the chopped meat head in a cool and ventilated place to dry for 1-2 days, then wipe some rooting powder, and then put it in a bottle filled with water. As long as the lower end of the meat is slightly immersed in water, it can take root in less than 5 days

3. For those fleshy roots that are always rotten, you can also remove the pot, clean all the soil on the roots, and then clean all the old and weak roots, and then directly turn to hydroponic culture, which is also very fast

How to make fleshy roots grow more:

1. If you want more meat to take root in hydroponic culture, you can add some slow-release fertilizer to the hydroponic bottle. Slow release fertilizer can only be used after more meat takes root. Put 1-3 grains of compound fertilizer in water to melt, and the ratio is about 1:1000

2. At an interval of 7-10 days, drop 5-10 drops of slow-release fertilizer solution into the succulent hydroponic bottle. When the succulent absorbs nutrition, the root system can grow more and more

Fugui bamboo hydroponic culture

When raising Fugui bamboo, most flower friends encounter the problem that Fugui bamboo does not take root, or yellow leaves after taking root, which is annoying! Today, Huahua will talk about how to grow the roots of baihuahua from this hydroponic Fugui bamboo

Operation steps:

1. Once it is found that Fugui bamboo has rotten roots, take out Fugui bamboo and cut off all the rotten roots

2. When cutting with scissors, pay attention to cutting an inclined plane of about 45 ° at the bottom of the stem of Fugui bamboo, so as to increase the water absorption area of the stem of Fugui bamboo

3. Put Fugui bamboo in the water again, and then put it on Nanyang platform. Change the water once in about 3-5 days, and it will soon take root. After rooting, change the water about once a week. When changing water, be sure to rinse the mucus of the stem with clean water

How to make the roots of Fugui bamboo more dense:

1. The rotten roots of Fugui bamboo are often accompanied by yellow leaves. At this time, ferrous sulfate can be added to supplement Fugui bamboo with iron, so as to prevent the rotten roots of yellow leaves. Ferrous sulfate solution must be used after Phyllostachys pubescens takes root. Dilute ferrous sulfate with water in the ratio of 1:1000 and mix it into ferrous sulfate solution

2. Add 5-7 drops of ferrous sulfate solution into the hydroponic flask every time, about once every 10-15 days. It will soon be found that Fugui bamboo does not have yellow leaves, and the longer the root system is, the more

Longevity flower water plug

As summer passed, it was time for the longevity flower to begin to grow. The pruned branches at this time can be inserted with water, but they take root very quickly

Operation steps:

1. The branches of longevity flower trimmed in autumn can be cut short. At least one pair of leaves shall be reserved on each branch, and then put in a cool and ventilated place to dry

2. In order to increase the rooting speed, the branches of Changshou flower can be soaked in carbendazim solution for about 20 minutes, dried and inserted into water. The lower end of the branches must be immersed in the water a little

3. In less than a week, the water inserted longevity flower can grow white flower roots

How to make the roots of Changshou flower more and dense:

1. If you want to make the roots of Changshou flower grow more and more, you can add some self-made rooting agent. Mix rice vinegar and water in the ratio of 1:100 into rice vinegar aqueous solution

2. After inserting the longevity flower water, add about 20 drops of rice vinegar aqueous solution into the bottle. Rice vinegar can stimulate the growth of roots and make them grow more and stronger

Rose water plug

As soon as autumn comes, it's time for roses to become beautiful! But many flower friends reflect with Huahua that cutting roses always don't take root. It's better to try with water

Operation steps:

1. Prune the branches from the rose mother plant, and then cut them short, about 5-8cm for each branch

2. Soak the short cut rose branches in carbendazim solution for more than 20 minutes, and then take them out and dry them in a cool and ventilated place

3, then put the rose branch on the foam, then put the foam in the water, then put it in the cool and ventilated place such as Beiyang platform. p>

4. In about 7-10 days, the water planted rose can take root

How to make the root system of rose grow longer and more:

If you want Chinese rose to take root quickly and more, you should add some rooting agent to it. Usually, the phosphate fertilizer and water can be mixed into a solution in the ratio of 3:7, and then dropped into the bottle of hydroponic rose for about 10-20 drops, which can stimulate the rooting of rose and even make it take root several days earlier

Green pineapple water plug

After a summer's rubbing, the green rose almost grew crazy. At this time, it has to be trimmed. The twigs are cut down, and the twigs are cut down again

Water plugging steps:

1. From the pruned branches of green pineapple, select the part with air rooting for cutting, and the probability of rooting and survival is relatively high

2. Cut the branches of green pineapple into small sections of about 10cm, and cut the lower end of the branches into an inclined plane of 45 ° to increase the contact area with water

3. In order to promote the rapid rooting of green pineapple, self-made rooting agent can be used. Melt the white sugar in hot water, about 1:9. After the sugar water cools down, soak the branches of green pineapple in the sugar solution for about 40 minutes, take them out and rinse them with clean water

4. Insert the branches of green pineapple into the bottle filled with water, ensure that 1 / 4 of the branches and air roots are soaked in water, and then put them in a place with sufficient scattered light for maintenance

5. Change water once in about 2-3 days, and it will take about a week to take root

How to make the roots thicker:

After the Green Rose takes root, in order to make the roots of the green rose grow more and more dense, you can pour some rotten rice washing water on the green rose. Usually collect the rice washing water and put it in the sun to fully mature

About 8-10 days to drop about 20 drops into the green rose bottle, you can make the green rose root system grow more prosperous

Fortune tree hydroponic culture

According to Huahua's observation, the rich tree should be easy to rot its roots, because if you don't pay attention to watering a little, the roots will rot. In that case, why not use hydroponics

Operation steps:

1. If you want to turn soil culture into water culture, you must first remove the pot from the rich tree, and then clean up the soil on the roots, especially those old roots, if roots and rotten roots

2. Disinfect the roots with carbendazim solution or potassium permanganate solution. Soak the root of the pruned fortune tree in carbendazim solution for about 20-40 minutes, then take it out and dry the wound in a cool and ventilated place

3. Put the fortune tree in a hydroponic flask. The stem should not touch water, otherwise it will rot. Change the water once every 2-3 days, and the root system of white flower can be produced in basically one week

How to make the roots of fortune tree more dense:

1. In order to make the roots of fortune tree more, crush one tablet of aspirin and mix it with clean water in the ratio of 1:1000 to form a solution

2. In about 10 days, add 10 drops of aspirin solution to the water culture bottle of fortune tree, so as to promote the root system of fortune tree to grow faster

Clivia Hydroponics

Clivia has bright leaves and bright flowers, which are loved by many people, but Clivia is particularly easy to rot. So what to do after rotten roots? It's better to hydroponic it

Operation steps:

1. If the root system of Clivia has rotted, it is necessary to remove the pot and cut off all the rotten roots

2. After pruning the root system of Clivia, soak it in carbendazim or potassium permanganate solution for about 20 minutes, and then put it in a cool and ventilated place to dry the wound

3. Fix the dried Clivia with a planting basket, and then put it in a hydroponic bottle for maintenance. In about 7 days, Clivia can grow new roots

How to make the roots of Clivia denser and more:

1. In order to increase the root system of Clivia, usually take a tablet of vitamin B12, completely crush it, and mix it with clean water in the ratio of 1:1000-1:2000 to form vitamin B12 solution

2. In about 5-7 days, add 10-20 drops of vitamin B12 solution to the water culture bottle of Clivia, which can promote rooting and make Clivia grow white roots quickly

Chlorophytum water plug

Many flower friends raise Chlorophytum at home. After a long time, many small Chlorophytum will grow. These small Chlorophytum can be cut and inserted into the water, and can also become new Chlorophytum plants

Operation steps:

1. Cut the small Chlorophytum from its mother plant. In order to improve the survival rate, flower friends can choose those with some roots at the bottom of Chlorophytum. If there is no root, there is no problem

2. Put the cut small Chlorophytum in a hydroponic flask, dip the bottom of the Chlorophytum with a little water, and then put it in a cool and ventilated place

3. In about a week, the small Chlorophytum can grow roots

How to make the root system of Chlorophytum white and more:

1. If you want to make Chlorophytum root more and faster, you can add some self-made rooting agent. You can go to the willow tree beside the road to break a willow branch, then cut the willow branch into a small section of about 5-7cm, soak it in hot water for more than 24 hours, and make it into willow extract

2. Put about 10 drops of willow branch leaching solution into the hydroponic bottle. In less than half a month, it can be found that the longer the root system of Chlorophytum is, the more it will break the bottle

Asparagus hydroponic culture

Among the flowers that have been raised by flowers, asparagus should be the most prone to yellow leaves. As long as there is not enough water, asparagus is easy to yellow leaves. In that case, it's better to hydroponic culture

Operation steps:

1. Remove the basin of asparagus, clean up all the soil on the root system, and then cut off all the old roots, weak roots and fine roots on the root system

2. The pruned asparagus root system is soaked in carbendazim solution for about 20 minutes for sterilization and disinfection to avoid the rotten root of hydroponic asparagus

3. The stems of asparagus are thin and weak. When hydroponic culture is carried out, ceramsite must be added to play a fixed role. The water in the hydroponic bottle is probably less than 2 / 3 of the bottle

How to make more and more roots of asparagus:

If you want more and more asparagus roots, you can add some nutrient solution to the hydroponic bottle. In about 10 days, drop about 10 drops of nutrient solution into the hydroponic bottle. Asparagus absorbs sufficient nutrients, grows more and more prosperous, and there are more and more roots

Water culture of Herba Coptidis

The last thing Huahua wants to say is copper coin grass. Copper coin grass has large round leaves and looks like ancient copper coin, so many flower friends have raised copper coin grass at home, but how to make copper coin grass grow more prosperous is a problem

Operation steps:

1. If some flower friends think that the copper coin grass at home grows slowly, it's better to cultivate it with water. Remove the copperhead from the basin and clean the soil on the root system with plenty of water. Be sure to gently clean it when cleaning, otherwise it will damage the root system

2. Transfer the Pennisetum to the hydroponic flask, add some ceramsite or small stone to fix it, and then add water. When adding water, pay attention that the amount of water must not exceed the root system of Pennisetum, so that Pennisetum will change from soil culture to water culture

How to make the roots of Pennisetum more white:

Copper coin grass grows very fast. As long as there is plenty of water and sun, it can grow vigorously without rotten roots. In order to avoid the root rot of Pennisetum, you can add a few pieces of charcoal or drop a few drops of carbendazim solution into the hydroponic flask, so as to play the role of sterilization and disinfection and prevent the root rot of Pennisetum