Rhododendron
1. Select the semi lignified top branches, cut off the length of 5 ~ 10cm, remove the leaves under the branches, and only keep the top branches p>
2, cut the processed Rhododendron branches into the foam board, and expose the foam board at the bottom of the branch for about three centimeters. p>
3, put the foam board in a large water tank. First, hydroponics is used to induce the root. p>
4. After waiting for half a month to one month, the Rhododendron will grow roots. When the roots grow stronger, it can almost be put into the pot p>
5. When putting them into the pot, first take out the azaleas rooted in hydroponics and put them in a cool place to dry for about 10 minutes, then put them into the pot, and then put them in the scattered light to slow the seedlings for a period of time before normal maintenance p>
Camellia
1. Select the annual semi lignified branches, cut about 10cm with scissors, and leave 3 leaves at the top p>
2. Prepare clean river sand. Cutting with river sand will take root quickly p>
3. Soak the cuttings and wounds in carbendazim, sterilize and disinfect them, and then apply some rooting powder on the wounds to promote rooting p>
4. Insert 1 / 3 of the branches into the sand, water them and put them in a cool and ventilated place, such as the north balcony p>
3. Spray it with a watering can every morning and evening, and it can take root in about a month. If the air humidity is too low, you can put on a plastic bag~
But remember to loosen the plastic bag every day p>
Rose
1. Prepare blades, scissors, plastic bottles, transparent tape and vermiculite p>
2. Cut off the bottom of the plastic bottle and then cut it vertically p>
3. Select the robust rose branches and peel them with a blade at a distance of 10 to 15 cm from the ground. The length of the stripping is about 1 cm. Like the picture below p>
4. Put the cut plastic bottle with the bottle mouth facing down, break it and put it on the peeled rose branches, and then stick the plastic bottle with transparent tape p>
5. Fill the plastic bottle with vermiculite and pour it through. If there is no vermiculite, perlite can also be used instead p>
6. Seal the seal with a plastic bag to avoid rapid evaporation of water p>
7. After more than a month, the roots can grow. When the roots grow stronger, the plastic bottle can be removed and transplanted into a new flower pot. Slow the root in a cool place for 2 ~ 3 days, and you can maintain it normally p>
Jasmine
1. Select lignified branches and intercept 10cm. Cut off the top two leaves and leave the other two p>
2. After disinfecting the wound, soak it in rooting powder solution for about 20 minutes, dry it in the shade and insert it into fine sand. Place it at the corner of the ventilation wall and accept the scattered light p>
3. Spray water mist at least twice a day to maintain humidity. It will take about a month to take root. Wait for the roots to grow stronger, and then put them into the basin p>
Gardenia
1. Cut 10cm of 2-year-old branches. Take off the lower leaves and leave only the upper ones p>
2. Find a plastic bottle, pour pure water and put the insert in p>
3. Cover the bottle with plastic wrap and add some when you see that the water is gone. When you see small white bulges on the surface of the branches, you are about to grow roots. After the root comes out, it can be put into the basin p>