Steps for basin removal

If it is already planted in the flower pot, flower friends who intend to change the pot can first pat the four circles of the pot with their hands to separate the root system from its own qualitative wall. Then put the flowerpot upside down on your hand, press against the edge of the basin, knock the bottom of the basin, and then push the soil downward with your hand against the bottom hole, so that the plant can be safely detached

Vessel preparation

size is not necessary. Choose the right one. The holes in the bottom of the basin should be covered with thin foam. This will ensure that the soil will not fall from below, and it will also allow more water to flow directly. Then put the prepared broken bricks on the bottom layer, which is mainly used to filter water, with a thickness of 2-3cm

Basin filling process

Add a little organic fertilizer under the prepared flower pot, about 2cm. The substrate should be laid on the fertilizer. After 2cm, put the plant in, and fill it with a little nutrient soil, but don't fill it too slowly. Leave a position of 2-3cm at the mouth of the pot

Trimming after potting

Thin and diseased branches should be removed, but they should not be in full growth, but wait until the plant enters dormancy in winter, so as not to cause too much damage to the plant and affect the growth state of the current year. The removed diseased branches should not be thrown away, but should be burned, so as to avoid the spread of diseases

Curing after fabrication

is best kept at around 20-30 degrees centigrade. If it is lower than this value, it will be very difficult to take root. But if the temperature rises above 30 C, the possibility of contracting bacteria will be more serious. As the temperature rises, the proportion of decay will be greater. So if the ambient temperature is relatively high, it can be put in a little ventilated place or spray around to keep cool. But if you encounter rainy weather, you can choose not to spray, because this time the humidity is relatively large, and the temperature is not so high. p>