1、 Reproduction mode

1. Ramet

First, the branch that has been growing for two or three years is generally used to divide the plant, remove it from the basin, and then clean up the soil at the root. Its survival rate is very high. It can survive as long as the root is not seriously injured

Second, use some chicken manure as fertilizer. Choose soft soil and put some mud in the pond at the bottom of the basin

Third, water it thoroughly at one time after branching. Usually wait until the soil is dry, and the temperature of the water should be about the same as the temperature

2. Cutting

First, if the temperature is too low, its survival rate will not be very high, so it is best to carry out in an environment of 20-30 degrees. To choose bamboo with many branches and leaves, make a small cut on the selected bamboo, and then coat it with mosses. Keep it for ten days and keep it moist all the time

Second, after ten days, a tumor like knot will grow in the wound, and then it can be cut off

Third, put some soft and moist soil in a cloth bag, then prick some holes outside the cloth bag, and then put the branches in. Put it in the basin, fill the basin with soil, and it will soon survive

3. Sow

First, when its seed is soft, it means it is ripe. You can pick it, wash it with water, and then store it after drying

Second, wait until early April to plant its seeds in sandy soil, preferably in wooden pots. Put three seeds in each pot. Then cover it with sand. It can't be too thick or too tight

Third, after planting, pour a lot of water on it, and then seal it with fresh-keeping film to ensure that the temperature is about 25 degrees and the soil is wet enough

2、 Precautions

1. The soil should be breathable enough and the drainage effect should be good enough

2. Don't hurt its roots when putting pots on it. Change the soil once a year in spring, and use a larger pot every time

3. Water it often, but the dose should not be too large. You can spray water on its leaves. Spray once or twice a day in hot weather