Beer bottle water absorbing flowerpot
1. Prepare beer bottles (other wine bottles can also be used), scissors, hemp rope (thicker rope), alcohol, lighter, gauze and soil p>
2. Wrap the hemp rope around the upper part of the wine bottle, tie a knot, and then apply alcohol p>
3. Light the rope with a lighter p>
4. After burning the rope, quickly put it into cold water and cool it. In this way, the glass bottle can be easily divided into two sections p>
5. To avoid injury to the rower, polish the edge of the bottle with sandpaper p>
6. Cut the gauze into a square and then buckle two small holes in the middle p>
7. Then take a long piece of hemp rope, pass both ends of the hemp rope through two small holes, align them, twist them into a strand, and tie a knot at the tail p>
8. Put the head of the beer bottle upside down in the tail, put the gauze and rope in the upper half, trim the exposed gauze, and then fill the soil p>
9. Plant the prepared green seedlings into the soil, add water at the bottom of the bottle, and immerse the tail of the hemp rope in water p>
10. In this way, even if the flower friends usually forget to water, it will absorb water automatically p>
Iron box flowerpot
1. Prepare an iron box (biscuit box, tea box) p>
2. If you have a drill, you can use an electric drill. If you don't, you can use waste nails to slowly break a few holes p>
3. In order to be beautiful, you can find some wrapping paper to surround the box, or you can not wrap it p>
4. After wrapping, put the prepared soil in p>
5. Stick some decorations with glue according to your own ideas p>
6. You can use branches to make the frame of a house. After some creativity, we can get such a beautiful flowerpot! Drought tolerant plants can use iron boxes~
Paper shell cement flowerpot
1. Prepare to use the remaining paper shell and fold it into the shape shown in the figure below. One big and one small p>
2. First lay the bottom layer with the mixed cement, then cover it with a large paper shell, and then fill the interlayer with cement p>
3. After drying, peel off the outer paper shell p>
4. Then add soil and plant the flowers. Isn't it very beautiful p>
Branch flowerpot
1. Prepare tree branches and enough wire p>
2. Arrange the branches and connect them with iron wire near the upper and lower ends at one time p>
3. The flowerpot wall and flowerpot bottom are adjusted and connected according to the appropriate size p>
4. Finally, load the soil and plant the plants! It is very suitable for flower friends with a courtyard at home~
Plastic bottle flowerpot
1. Prepare a large coke bottle, thick rope, glue and scissors p>
2. Cut off half of the coke bottle, use the lower half, and make the incision neat without scratching p>
3. Wrap the rope around the bottle wall with glue to form a "coat" p>
4. Put the screwdriver on the gas stove to bake, and then poke a few small holes in the bottom of the bottle to make drainage holes p>
5. After doing it, it's like this p>
Flower pots made by flower friends
So many beautiful homemade flowerpots
Have you aroused the desire of flower friends to make it p>
Try it with Huahua quickly p>
Remember to share it with friends who love life~