Sprite bottle flowerpot, no need to water the flowers for 1 month

The more flowers you raise at home, watering becomes an individual activity. It's tiring to finish watering all the flowers every time. What can you do to prolong the watering time? Just one sprite bottle flowerpot

1. Find a large sprite bottle

Rinse the remaining drinks in the sprite bottle with clean water. The sprite bottle should be large and the bottle cap should be screwed

2. Cut the sprite bottle at the waist

Cut the sprite bottle with a knife and cut it from the middle of the bottle body into upper and lower parts

3. Poke a small hole in the bottle cap

Pierce a few small holes in the bottle cap. You can use a needle to pierce it, and then fill it with some water to see if the water can leak out from the small hole. It's just enough to leak out

4. Pour water into the lower half of the bottle

Pour the water into the lower half of the bottle, about 6 minutes full

5. Insert the top half upside down into the bottom half

Insert the part with the bottle cap upside down into the water in the lower part, fill the upper part with soil, and plant the flowers. The water will slowly penetrate into the soil through the small hole to keep the soil moist. If you don't water for about a month, the flowers won't die of drought

Cut the mineral water bottle by 1 knife to raise delicious garlic

Do flower friends like garlic? Huahua loves to eat garlic yellow. It is not only fresh and delicious, but also unique nutrition. In fact, a mineral water bottle can produce pure natural garlic yellow, which is super simple! Come and see

1. Find some plastic bottles

Mineral water bottle or beverage bottle can be used. Rinse the remaining drinks in the bottle with clean water. There is no need to keep the bottle cap for garlic yellow. Put the bottle cap aside

2. Cut off the top of the plastic bottle and insert it upside down

Cut off the upper part of the plastic bottle with a knife and insert it upside down into the bottle

3. Pour in water and add a garlic

Pour water into the plastic bottle, then put a head of garlic and let the bottom of the garlic touch the water

4. Put it in the dark

Put the plastic bottle in a dark place to make the garlic grow yellow, or it will turn green

5. Harvest garlic for about 20 days

Change the water every 10 days. After about 20 days, you can cut off the garlic and eat it

Cut the mineral water bottle by 1 knife and change it into a cutting artifact in seconds

Spring is very suitable for cutting. Flower friends should hurry up and cut the plastic bottle at home. It will become a cutting artifact! Rub and grow big white roots

1. Cut the plastic bottle with a knife

Find a clean mineral water bottle and cut it from 1 / 3. Be careful not to cut it all

2, insert branches into foam

poked 1 holes on the foam board to cut the branches from the hole, which is more conducive to quickening the rooting speed. The foam plate should be less than the diameter of the bottle and can be easily removed from the bottle or put in. p>

3, put the foam in the bottle,

pour the water into the bottle first, then 2-3 centimeters high at the bottom of the bottle, then put the foam board in the bottle and let the bottom of the branch into the water. p>

4. Stick on the cut with adhesive tape

Close the upper and lower parts of the plastic bottle, and then stick the cutting edge with adhesive tape

5. About a week later, Huhu took root

Put the plastic bottle under the scattered light. Generally, the root will appear in 7 days. It's white and thick

Plastic bottles turn waste into treasure

Save money and be creative

Flower friends, try it quickly

I think what Huahua said is useful

Just share it with others