Three dimensional flower rack 1

Source: corporate Dad

Manufacturing steps:

1. Prepare PVC pipe drilling

Go to the hardware market and buy a PVC pipe with a diameter of about 110cm and a diameter of about 7cm for standby

2. Punching

Punch holes on PVC pipes at an interval of 20cm. If you want to make two sides, punch two holes, and if you want to make four sides, punch four holes. What we need to do today is to drill 4 holes. The front and rear 2 holes and the left and right 2 holes are not on the same horizontal plane

3. Wire bending

Bend the iron wire prepared in advance into an iron ring, and the bending diameter is determined according to the size of your own flowerpot. Do not use too thin iron wire, otherwise it is easy to deform

4. Insert iron ring into PVC pipe

Insert the bent iron ring into the PVC pipe in turn, the extended part passes through the hole and bends down, and then tie it tightly with something like iron wire to prevent the iron ring from shaking

5. PVC pipe fixing

Seal the bottom of the PVC pipe, first pour about 1 / 4 of the sand into the flower pot, and then dry the soil after filling, which is more firm

If there is an abandoned clothes hanger base at home, the PVC pipe can also be fixed on the base of the triangular clothes hanger, which can also enhance the fixation and prevent the pipe from skewing after it is placed in the flower pot

6. PVC pipe fixing

In this way, a three-dimensional flower rack will be done! Put the flowerpots you want to place one by one, and you're done! However, it needs to be rotated every few days to prevent uneven light exposure of flowers

Three dimensional flower rack 2

Photo source: the balcony is a little sweet

Manufacturing steps:

1. Prepare PVC pipe

If there is no wire in Huayou's home, you can also directly use PVC pipe to make it. First prepare a PVC pipe with a length of at least 1m

2. Scribing and sawing

Scribe the PVC pipe at an interval of 10cm, and then cut the scribed part with a saw

3. Baking press

After sawing, bake it with fire a little, then take another pipe and press it down along the sawing place to make the sawing place form a groove

4. Seal the bottom

Completely seal the bottom of the PVC pipe, so that a three-dimensional flower rack is ready

5. Fill soil to grow vegetables and flowers

Finally, fill the soil into the pipe and put the seedlings of flowers and plants or vegetables on it, even if it is completed

In addition to the above introduction, there are many self-made flower racks, which do not occupy space and are easy to raise flowers. Come and have a look

After reading Huahua's introduction

Are you excited about flowers

Flower friends, why don't you try it by hand