Your flowers are dead? Don't throw it, one move to save the life!

Author:JamesZ Date:2022-04-02 05:39

Every time I see beautiful flowers, I want to raise one, but when I think of buying one pot at home and dying one pot at a time, I lose confidence... In fact, it is not difficult to raise flowers, and flowers are not so easy to die. Sometimes they look like they are dead, but they are still alive! Don't lose it. There are many ways to "bring the dead back to life" here~

Rose

flowers and plants

European moon, Mini Rose, little rose... This year is really necessary for every family. There are many problems to raise. Every day, flower friends come for help: is my rose dead

Although roses are sensitive, they still have strong vitality. Ordinary yellow leaves and fallen leaves can be solved. As long as the cross section of branches and stems is still alive (with green), everything else is nothing

1. Pruning method

It doesn't matter if the leaves are all yellow. Cut all the dry branches and leaves, and cut the flower branches until there are living green branches

After cutting the branches, put them in a ventilated place, keep the light for more than 4 hours every day, water them once every 2-3 days, and new leaves will grow in 1-2 weeks

2. Soil and basin replacement method

The flower soil has been hardened and airtight, and the flower pot is too large, which may cause yellow leaves and leaf loss of rose. At this time, it is necessary to change the soil and pot

Replace it with rotten leaf soil with good air permeability, and put the flowers in the basin at a fist distance from the edge of the basin. After replanting, water it and put it in a place with astigmatism and ventilation to slow the seedling for 2-5 days

3. Wax dropping method

The rose "bitten to death" by the insect must choose this method, because the insect is very small. It will be over if you accidentally climb into the flower stalk

Cut off the moth eaten part and put wax on the incision, white wax or red wax

no wax at home can be sealed with transparent nail polish. It can also prevent insects

.

4. Cutting method

Chinese rose is easy to cut. Generally, April May and September October are the golden time for Chinese rose cutting, so it's still time for cutting

Vermiculite is mixed with sandy soil and garden soil, so that it has good air permeability and moisture retention. Pick 10-16cm long flower branches (at least 2 bud points), insert them into the soil, water them and put them in a cool and ventilated place

In the process of cutting, you can pour some rooting powder and water (rooting powder and water 1:2000) to speed up the rooting speed

Gardenia

flowers and plants

Although the traditional flowering period of gardenia is over, many flower friends still have various problems when they buy Gardenia with disordered flowering period on the market, so! Huahua feels that it is urgent to rescue gardenia~

1. Pruning method

For Gardenia bought from pots in the market, the boss will generally add fertilizer to the pot soil, and the fertility will be consumed slowly. The old leaves begin to wither and yellow. At this time, cut off the yellow leaves and weak branches to preserve nutrition

2. Watering method

Gardenia likes acidic soil and is prone to iron deficiency. Some flower friends have alkaline soil and water, so it's not good to keep leaves

At this time, just add a spoon of vinegar when watering. The ratio of vinegar to water is about 1:200. Pour vinegar and water 1-2 times a month. Don't pour too much, which is easy to corrode flowers

Iron deficiency is also easy to do. In addition to buying ferrous sulfate and watering flowers with water, if you have a big iron pot at home, you can water Gardenia by brushing a few times and rubbing some iron down

3. Root trimming method

If the Gardenia wilts and leaves fall out in a few days, it's probably a broken root. Dig it out quickly

Carefully clean the rotten roots and rinse them with water. You can also soak carbendazim solution for 10-20 minutes to sterilize them, and then plant them again after drying

4. Rooting method

Many Gardenia friends have rotten roots and can't be saved. Don't lose heart. There are still ways for flowers, as long as your gardenia and branches are green

Cut off the flower branches with vitality, about 8-15 cm. Insert them directly into the water and take root in about 7-10 days

note that when the water is inserted, the bottom of Gardenia does not touch the bottle. It will hinder the rooting. First, gardenia can be inserted into foam as a life jacket, so it will float up

Hydrangea

flowers and plants

Many flower friends can't move their feet when they see the hydrangea ball. They wilt in a few days after buying it, or they will die as soon as the flower fails. It's really not easy

In fact, Hydrangea is only "gentle and quiet", especially afraid of tossing, so the following methods of flower are "lazy" method

1. Leaf cutting method

Hydrangea has a fast transpiration, especially those just bought. As soon as they leave the greenhouse with high temperature and humidity and come to a relatively dry family environment, they wilt immediately

The withering of Hydrangea is terrible. Don't throw it away. Cut off the leaves, cut the branches short (keep about 20cm), water them and put them in a cool and ventilated place

Be careful not to be directly exposed to the sun. Astigmatism is the best. Turn the basin in two or three days to make the flowers receive light evenly

2. Bagging method

The seasons alternate and the temperature fluctuates. Hydrangea likes to be warm and humid, so it is easy to wilt. A plastic bag is put on the head to keep warm and moisturize

3. Pest control and disease treatment

Hydrangea has large leaves, and some fatal diseases will appear on the leaves. Flower friends should observe in time and spray the medicine as soon as they find it

Pouring Hydrangea with ferrous sulfate mixed with water (1:1000) can treat yellow leaves. Pay attention not to pour it every day. Pour it 1-2 times after yellow leaves appear

Household alcohol mixed with water (1:500) and garlic water (2 cloves of garlic mixed with 1 bowl of water) can be used to wipe the sick Hydrangea leaves, sterilize and clean them, and prevent various fungal diseases

4. Cutting method

If Hydrangea looks unable to return to the sky, you can take branches and cuttings, at least 6cm

Cut off half of the leaves to save nutrition. Insert them in the sand and put them in a cool place to avoid direct sunlight

The next step is moisturizing. Spray water every day to keep the sand slightly wet. Don't be curious to pull it out. At this temperature, it will take about 20 days to take root

Fleshy

flowers and plants

As soon as the weather is hot, all kinds of meat problems pop up. Don't you know that flower friends have a way to parry

1. Sunbathing method

Many flower friends are afraid of sunburn, so they put all the meat indoors, and then the meat will grow poorly. One by one, the "zombie color", and the good little freshness is deceptive

In fact, it's not hot yet. The meat hasn't entered the dormancy period yet. You can also bask in the sun, "ruddy and shiny"! Flower friends in the South can cover the shade at noon

2. Root trimming method

Once there is water and black rot in the meat, most of the roots are rotten. Dig out the roots quickly, clean up the rotten roots and remove the bad leaves

The repaired roots can be soaked in carbendazim solution for 10-20 minutes and directly replanted after drying

3. Rooting method

Some flower friends may find that the roots are rotten after digging out the meat. After cleaning up, cut off 1-2cm from the bottom, and soak the rest in the water of rooting powder. They can take root in about 5-8 days

4. Leaf interpolation

Some fleshy and rotten leaves are left, and they can also be inserted. Here, let's repeat the method of leaf insertion~

Growth point: only when the growth point is normal can the leaf insertion be successful. The leaf insertion with blocked or shriveled growth point is white work

It's best to place the leaf cuttings flat on the moist flower soil. The leaves after the disease are easy to be infected when inserted into the soil. Flat placement can play a role in isolation

The process of leaf cutting and rooting is 7-10 days. During this period, it should be placed in a cool and ventilated place. Don't sprinkle water at will. It's best to use a small drop bottle and pour it directly onto the soil

About a month later, the seedlings grow strong and can be planted in pots~

The method of raising flowers is also similar

Do you feel more confident after reading it

A good flower friend

We should also share more experience~

© Copyright Theflowerwiki.Com. All Rights Reserved. Sitemap DMCA Privacy Policy Novelhall Youbrief
Top

Your flowers are dead? Don't throw it, one move to save the life!

JamesZ
2022-04-02 05:39
Description Every time I see beautiful flowers, I want to raise one, but when I think of buying one pot at home and dying one pot at a time, I lose confidence... In fact, it is not difficult to raise flowers, and flowers are not so easy to die. Sometimes they look like they are dead, but they are still alive! Don't lose it. There are many ways to "bring the dead back to life" here~

Rose

flowers and plants

European moon, Mini Rose, little rose... This year is really necessary for every family. There are many problems to raise. Every day, flower friends come for help: is my rose dead

Although roses are sensitive, they still have strong vitality. Ordinary yellow leaves and fallen leaves can be solved. As long as the cross section of branches and stems is still alive (with green), everything else is nothing

1. Pruning method

It doesn't matter if the leaves are all yellow. Cut all the dry branches and leaves, and cut the flower branches until there are living green branches

After cutting the branches, put them in a ventilated place, keep the light for more than 4 hours every day, water them once every 2-3 days, and new leaves will grow in 1-2 weeks

2. Soil and basin replacement method

The flower soil has been hardened and airtight, and the flower pot is too large, which may cause yellow leaves and leaf loss of rose. At this time, it is necessary to change the soil and pot

Replace it with rotten leaf soil with good air permeability, and put the flowers in the basin at a fist distance from the edge of the basin. After replanting, water it and put it in a place with astigmatism and ventilation to slow the seedling for 2-5 days

3. Wax dropping method

The rose "bitten to death" by the insect must choose this method, because the insect is very small. It will be over if you accidentally climb into the flower stalk

Cut off the moth eaten part and put wax on the incision, white wax or red wax

no wax at home can be sealed with transparent nail polish. It can also prevent insects

.

4. Cutting method

Chinese rose is easy to cut. Generally, April May and September October are the golden time for Chinese rose cutting, so it's still time for cutting

Vermiculite is mixed with sandy soil and garden soil, so that it has good air permeability and moisture retention. Pick 10-16cm long flower branches (at least 2 bud points), insert them into the soil, water them and put them in a cool and ventilated place

In the process of cutting, you can pour some rooting powder and water (rooting powder and water 1:2000) to speed up the rooting speed

Gardenia

flowers and plants

Although the traditional flowering period of gardenia is over, many flower friends still have various problems when they buy Gardenia with disordered flowering period on the market, so! Huahua feels that it is urgent to rescue gardenia~

1. Pruning method

For Gardenia bought from pots in the market, the boss will generally add fertilizer to the pot soil, and the fertility will be consumed slowly. The old leaves begin to wither and yellow. At this time, cut off the yellow leaves and weak branches to preserve nutrition

2. Watering method

Gardenia likes acidic soil and is prone to iron deficiency. Some flower friends have alkaline soil and water, so it's not good to keep leaves

At this time, just add a spoon of vinegar when watering. The ratio of vinegar to water is about 1:200. Pour vinegar and water 1-2 times a month. Don't pour too much, which is easy to corrode flowers

Iron deficiency is also easy to do. In addition to buying ferrous sulfate and watering flowers with water, if you have a big iron pot at home, you can water Gardenia by brushing a few times and rubbing some iron down

3. Root trimming method

If the Gardenia wilts and leaves fall out in a few days, it's probably a broken root. Dig it out quickly

Carefully clean the rotten roots and rinse them with water. You can also soak carbendazim solution for 10-20 minutes to sterilize them, and then plant them again after drying

4. Rooting method

Many Gardenia friends have rotten roots and can't be saved. Don't lose heart. There are still ways for flowers, as long as your gardenia and branches are green

Cut off the flower branches with vitality, about 8-15 cm. Insert them directly into the water and take root in about 7-10 days

note that when the water is inserted, the bottom of Gardenia does not touch the bottle. It will hinder the rooting. First, gardenia can be inserted into foam as a life jacket, so it will float up

Hydrangea

flowers and plants

Many flower friends can't move their feet when they see the hydrangea ball. They wilt in a few days after buying it, or they will die as soon as the flower fails. It's really not easy

In fact, Hydrangea is only "gentle and quiet", especially afraid of tossing, so the following methods of flower are "lazy" method

1. Leaf cutting method

Hydrangea has a fast transpiration, especially those just bought. As soon as they leave the greenhouse with high temperature and humidity and come to a relatively dry family environment, they wilt immediately

The withering of Hydrangea is terrible. Don't throw it away. Cut off the leaves, cut the branches short (keep about 20cm), water them and put them in a cool and ventilated place

Be careful not to be directly exposed to the sun. Astigmatism is the best. Turn the basin in two or three days to make the flowers receive light evenly

2. Bagging method

The seasons alternate and the temperature fluctuates. Hydrangea likes to be warm and humid, so it is easy to wilt. A plastic bag is put on the head to keep warm and moisturize

3. Pest control and disease treatment

Hydrangea has large leaves, and some fatal diseases will appear on the leaves. Flower friends should observe in time and spray the medicine as soon as they find it

Pouring Hydrangea with ferrous sulfate mixed with water (1:1000) can treat yellow leaves. Pay attention not to pour it every day. Pour it 1-2 times after yellow leaves appear

Household alcohol mixed with water (1:500) and garlic water (2 cloves of garlic mixed with 1 bowl of water) can be used to wipe the sick Hydrangea leaves, sterilize and clean them, and prevent various fungal diseases

4. Cutting method

If Hydrangea looks unable to return to the sky, you can take branches and cuttings, at least 6cm

Cut off half of the leaves to save nutrition. Insert them in the sand and put them in a cool place to avoid direct sunlight

The next step is moisturizing. Spray water every day to keep the sand slightly wet. Don't be curious to pull it out. At this temperature, it will take about 20 days to take root

Fleshy

flowers and plants

As soon as the weather is hot, all kinds of meat problems pop up. Don't you know that flower friends have a way to parry

1. Sunbathing method

Many flower friends are afraid of sunburn, so they put all the meat indoors, and then the meat will grow poorly. One by one, the "zombie color", and the good little freshness is deceptive

In fact, it's not hot yet. The meat hasn't entered the dormancy period yet. You can also bask in the sun, "ruddy and shiny"! Flower friends in the South can cover the shade at noon

2. Root trimming method

Once there is water and black rot in the meat, most of the roots are rotten. Dig out the roots quickly, clean up the rotten roots and remove the bad leaves

The repaired roots can be soaked in carbendazim solution for 10-20 minutes and directly replanted after drying

3. Rooting method

Some flower friends may find that the roots are rotten after digging out the meat. After cleaning up, cut off 1-2cm from the bottom, and soak the rest in the water of rooting powder. They can take root in about 5-8 days

4. Leaf interpolation

Some fleshy and rotten leaves are left, and they can also be inserted. Here, let's repeat the method of leaf insertion~

Growth point: only when the growth point is normal can the leaf insertion be successful. The leaf insertion with blocked or shriveled growth point is white work

It's best to place the leaf cuttings flat on the moist flower soil. The leaves after the disease are easy to be infected when inserted into the soil. Flat placement can play a role in isolation

The process of leaf cutting and rooting is 7-10 days. During this period, it should be placed in a cool and ventilated place. Don't sprinkle water at will. It's best to use a small drop bottle and pour it directly onto the soil

About a month later, the seedlings grow strong and can be planted in pots~

The method of raising flowers is also similar

Do you feel more confident after reading it

A good flower friend

We should also share more experience~

More
Related articles