1、 How to cut

The first step is to select the insert with a length of about 10cm, and the top part is the most suitable. This part grows rapidly

The second step is to let the cut dry for several days after cutting the cuttings. After forming a layer of film, it can be placed in the sand bed, sediment and perlite. Fine yellow sand can also be used. The lower part is slightly rough sand and stone, which is conducive to water diversion, and the upper part is fine sand and stone, which is conducive to water storage

The third step is to place it in the semi shade after inserting, and keep the indoor temperature at 13-18 ℃. Generally, after 14-21 days, the root can be placed in a pot. At this time, the length of the root is about 3-4 cm

Step 4: after the first soaking of watering, just spray water properly. Spray an appropriate amount of water every day for three days, and then spray it every other day in cloudy days and every day in sunny days. It should be noted that the plants in the later stage should be placed in direct sunlight. Remember to spray water often to wet the plant surface

Note: do not hurt the skin of the insert, otherwise it is easy to blacken and necrosis. If possible, the root of cuttings can be soaked with 0.01% indole butyric acid for 1-2 seconds in order to improve the survival rate. Generally, it can bloom after 6 months

2、 Cutting time

Except for sleeping in June and July, it can be carried out at other times. Spring and autumn are the best. The weather is hot in summer, and the cuttings are easy to rot