1、 Watering
Snow in June is suitable for growing in wet places, and proper replenishment of water during breeding is essential. Usually, it should be watered every day during its growth, and more water should be watered appropriately when the temperature is high, but there should be no ponding in the soil. Pay attention not to be caught in the rain on rainy days. After being caught in the rain, put the flowerpot obliquely to promote drainage p>
2、 Illumination
It likes sunshine. It needs to provide sufficient light during its growth period, but it can also resist shade, but it can't be exposed to strong light. When the sunlight is not strong in spring, autumn and winter, it can be placed in a place with good light for maintenance. After entering the midsummer, pay attention to transfer the position and do not put it under direct light p>
3、 Temperature
The temperature of the breeding environment should be adjusted to the range suitable for its growth, and the most suitable temperature is about 15-25 ℃. The temperature in summer is usually high. Pay attention to reducing the temperature, but don't put it in the mouth of the air conditioner. When the temperature is low in winter, it should also be noted that the minimum temperature should not be lower than 0 ℃ p>
4、 Turning Basin
The pot turning shall be carried out once every 2-3 years, and the time shall be in early spring as far as possible. When turning the pot, it shall be replaced with new clean soil. If you still use the old flowerpot, you should disinfect it before reuse p>